文章摘要
李晓刚.基于Matlab/Simulink的缓冲包装系统动态响应及影响因素分析[J].包装工程,2011,32(1):65-69.
LI Xiao-gang.Analysis of Dynamic Response and Influencing Factors of Cushioning Package Based on Matlab/Simulink[J].Packaging Engineering,2011,32(1):65-69.
基于Matlab/Simulink的缓冲包装系统动态响应及影响因素分析
Analysis of Dynamic Response and Influencing Factors of Cushioning Package Based on Matlab/Simulink
投稿时间:2010-10-10  修订日期:2011-01-10
DOI:
中文关键词: 缓冲包装  振动  跌落  传递率  仿真  Matlab/Simulink
英文关键词: cushioning package  vibration  drop  transmissibility  simulation  Matlab/Simulink
基金项目:
作者单位
李晓刚 北京林业大学北京100083 
摘要点击次数:
全文下载次数:
中文摘要:
      把缓冲包装系统简化为了两自由度线性系统,将系统运动微分方程变换为了无量纲形式,然后写成矩阵形式的状态方程,借助Matlab/Simulink动态仿真工具构建了包装系统的仿真模型,分析了包装系统受迫振动和跌落冲击响应,并讨论了与质量比、阻尼比、频率比、跌落高度等因素的关系。可避免不必要的破坏性试验,为优化运输包装设计提供理论依据。
英文摘要:
      The cushioning package was predigested as a double degree-of-freedom system. The movement differential equations were transformed into dimensionless equations and then state equations in form of matrix. By using Matlab/Simulink, the simulation models were established. The forced vibration and drop response of cushioning package were analyzed. And the relationships between the response and mass ratio, damping ratio, frequency ratio, dropping height were discussed. The simulation can avoid unnecessary destructive tests and provide theoretical basis for optimizing cushioning package.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21112809位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号