文章摘要
马卫静,陈满儒,李强.“利乐包”塑木托盘的有限元分析[J].包装工程,2011,32(1):76-79.
MA Wei-jing,CHEN Man-ru,LI Qiang.Finite Element Analysis of "Tetra Pak" Plastic-wood Pallet[J].Packaging Engineering,2011,32(1):76-79.
“利乐包”塑木托盘的有限元分析
Finite Element Analysis of "Tetra Pak" Plastic-wood Pallet
投稿时间:2010-07-08  修订日期:2011-01-10
DOI:
中文关键词: 塑木技术  利乐包  塑木托盘  有限元分析
英文关键词: plastic wood technology  Tetra Pak  plastic-wood pallet  finite element analysis
基金项目:
作者单位
马卫静 陕西科技大学西安710021 
陈满儒 陕西科技大学西安710021 
李强 廊坊耐帆包装工程有限公司廊坊065001 
摘要点击次数:
全文下载次数:
中文摘要:
      采用塑木挤出成型技术,将打碎的“利乐包”挤压成型,选择其板材加工成托盘。根据林派检测报告相关数据:弹性模量、静曲强度以及塑木材料弯曲强度,基于ANSYS有限元分析软件,对托盘板材在静态承重与叉车叉起时的力学性能和承载性能进行分析。结果表明:1.1 t的承载下,板材不会开裂,满足实际使用要求。
英文摘要:
      Smashed Tetra Pak was extrusion molded by plastic wood extrusion technology and its plate was used to make pallet. ANSYS software was used to analyzed mechanical properties of specified pallet under the static load-bearing and lifted by Forklift. The data was from Linpai report such as elastic modulus, and bending strength. The results showed that the plate don't crack under l. It load. It was concluded that the plate can meet the requirement of practical application.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21118290位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号