文章摘要
颜春林,徐向纮.钎焊环定量称重系统的飞料自校正补偿方法的研究[J].包装工程,2011,32(3):57-59.
YAN Chun-lin,XU Xiang-hong.Research on Residues Self-tuning Compensation Method of Brazing Ring Quantitative Weighing System[J].Packaging Engineering,2011,32(3):57-59.
钎焊环定量称重系统的飞料自校正补偿方法的研究
Research on Residues Self-tuning Compensation Method of Brazing Ring Quantitative Weighing System
投稿时间:2010-11-04  修订日期:2011-02-10
DOI:
中文关键词: 定量称重  分级给料  自校正控制
英文关键词: quantitative weighing  grade feeding  self-tuning control
基金项目:
作者单位
颜春林 中国计量学院 杭州 310018 
徐向纮 中国计量学院 杭州 310018 
摘要点击次数:
全文下载次数:
中文摘要:
      通过对称重系统下料系统方案的设计,采用粗、中、细3级给料的方式,以尽可能减少给料控制过程中,飞料对系统最终称量精度产生的影响。在中给料环节,采用自校正算法对提前量进行实时的校正,使实际计量值和设定值接近,进一步减小飞料对系统精度的影响,保证细给料环节有一个较小的给料量,解决了系统的称重精度和速度之间的矛盾。
英文摘要:
      The design of feeding system with 3 level feeding method containing thick feeding, medium feeding and fine feeding was introduced, to minimize the influence by residues on system precision in feeding control process. In medium feeding process, self-revised prediction model was established to revise the feeding amount in advance, to make setting values close to the actual measurement values, which reduce the influence of residues on feeding system precision, and ensure that the amount of fine feeding has a smaller quantity. The contradiction between the accuracy and speed of the weighing system was solved with this method.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22167914位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号