文章摘要
缪晓丽,唐正宁.印刷品质量检测过程中的色空间转换方法研究[J].包装工程,2011,32(3):71-73,80.
MIAO Xiao-li,TANG Zheng-ning.Development of Color Space Conversion Method for Printing Quality Inspection[J].Packaging Engineering,2011,32(3):71-73,80.
印刷品质量检测过程中的色空间转换方法研究
Development of Color Space Conversion Method for Printing Quality Inspection
投稿时间:2010-10-12  修订日期:2011-02-10
DOI:
中文关键词: 在线检测  色彩空间转换  四面体插值  色差
英文关键词: on-line defect  color space conversion  tetrahedron interpolation  color difference
基金项目:
作者单位
缪晓丽 江南大学 无锡 214122 
唐正宁 江南大学 无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      在标准图像和待测图像配准的基础上,采用几何插值法进行RGB到Lab的色彩空间转换。首先在原色空间中进行了非均匀分割,建立了查找表,然后在分割得到的栅格中应用四面体插值算法完成了到目标空间的转换,并且计算了对应点的色差,对转换后的色差分布进行了分析,以用于对印刷品是否存在偏色进行判定,效果较好。
英文摘要:
      During in printing quality inspection, the inspection of hue error is an important content. Geometrical lookup table with interpolation was applied to process the color space transformation (RGB to Lab) based on the registration of standard printed mater and printing mater. Firstly, source color space was divided unevenly and the relevant lookup table was established. The divided grids were transformed to target color space with tetrahedron geometrical interpolation algorithm. The color difference of corresponding points was calculated and the distribution of color difference was analyzed. The results were used to evaluate the color deflection of presswork. It was proved that this method has good effect.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22175632位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号