文章摘要
张改梅,仵季红,郭福宾.基于ANSYS/LS-DYNA的易拉罐跌落研究[J].包装工程,2011,32(5):4-6.
ZHANG Gai-mei,WU Ji-hong,GUO Fu-bin.Drop Analysis of Pop Can Based on ANSYS/LS-DYNA[J].Packaging Engineering,2011,32(5):4-6.
基于ANSYS/LS-DYNA的易拉罐跌落研究
Drop Analysis of Pop Can Based on ANSYS/LS-DYNA
投稿时间:2010-10-14  修订日期:2011-03-10
DOI:
中文关键词: 易拉罐  有限元  跌落  碰撞  应力
英文关键词: pop can  finite element  drop  impact  stress
基金项目:北京市委组织部优秀人才项目(09000001);北京印刷学院校重点资助项目(Ea201002)
作者单位
张改梅 北京印刷学院 北京 102600 
仵季红 北京印刷学院 北京 102600 
郭福宾 北京印刷学院 北京 102600 
摘要点击次数:
全文下载次数:
中文摘要:
      利用ANSYS有限元分析软件,通过对易拉罐不同跌落高度、不同碰撞地面的仿真分析,研究易拉罐在不同的跌落形式下的受力及变形。结果表明:随着跌落高度地增加,接触部位应力分布会扩大,并且应力也会相应地增加;面跌落相对于角跌落,应力会贯穿整个罐壁,并且向上出现不连续的传递,且逐渐减小。
英文摘要:
      Simulation analysis of pop can with different drop height and floors was carried out using ANSYS finite element analysis software. The purpose was to study the force and deformation of pop can under different drop forms. The results showed that the contact stress distribution expands and the stress increases with drop height increase. For the flat drop, the stress of can runs through the whole can wall, discontinuously transmits upwards to the other sections of can and gradually attenuates, with respect of corner drop.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20816752位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号