文章摘要
唐少炎,魏 星,吴若梅,曹小龙.瓦楞纸箱配纸方法的研究[J].包装工程,2011,32(9):27-29,97.
TANG Shao-yan,WEI Xing,WU Ruo-mei,CAO Xiao-long.Study of Paper Matching Method for Corrugated Box[J].Packaging Engineering,2011,32(9):27-29,97.
瓦楞纸箱配纸方法的研究
Study of Paper Matching Method for Corrugated Box
投稿时间:2011-02-18  修订日期:2011-05-10
DOI:
中文关键词: 瓦楞纸箱  配纸  抗压强度  性价比
英文关键词: corrugated box  paper matching  compression strength  cost effectiveness
基金项目:
作者单位
唐少炎 湖南工业大学 株洲 412008 
魏 星 湖南工业大学 株洲 412008 
吴若梅 湖南工业大学 株洲 412008 
曹小龙 湖南工业大学 株洲 412008 
摘要点击次数:
全文下载次数:
中文摘要:
      根据价值工程的定义和定量配比原则,引入了纸箱配纸方法的性价比数学模型,该模型以性价比最高为目标函数,以增大纸箱抗压强度、降低成本、遵循箱板纸与瓦楞芯纸的定量配比原则为约束条件。以0201型3层瓦楞纸箱为例,利用数学分析软件Matlab,对模型进行编程,实现了楞型与原材料的不断组合,性价比最高时,得到了最佳的纸箱配纸方案。
英文摘要:
      The conception of value engineering and ration matching principle were introduced to numerical model of corrugated box which used the best cost effectiveness as target function. The constraint conditions were made up of increasing compression strength, reducing cost, and ration matching principle of the corrugating medium and liner board. The numerical model was programmed using Matlab software with example of 0201 single box. The model can realize continue matching of flute and materials and output of optimized paper matching to achieve best cost effectiveness.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20986478位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号