文章摘要
李文彪,吴晓明.大尺寸液晶显示器纸浆模衬垫结构设计与优化[J].包装工程,2011,32(9):40-43.
LI Wen-biao,WU Xiao-ming.Structural Design and Optimization of Molded Pulps for Large-sized LCD[J].Packaging Engineering,2011,32(9):40-43.
大尺寸液晶显示器纸浆模衬垫结构设计与优化
Structural Design and Optimization of Molded Pulps for Large-sized LCD
投稿时间:2011-01-08  修订日期:2011-05-10
DOI:
中文关键词: 大尺寸显示器包装  纸浆模结构  折叠嵌套  优化设计
英文关键词: LCD packaging  molded pulp  folding and nesting  optimum design
基金项目:
作者单位
李文彪 厦门大学 厦门 361005 
吴晓明 厦门大学 厦门 361005 
摘要点击次数:
全文下载次数:
中文摘要:
      在纸浆模衬垫结构的缓冲机理研究基础上,介绍了32吋大平面液晶显示器纸浆模缓冲衬垫结构的设计方法。在充分考虑制造可行性基础上,提出了一种新型的折叠嵌套式纸浆模缓冲衬垫结构。通过仿真分析对结构进行优化,并验证所设计的衬垫结构的缓冲性能,为同类型大平面显示器纸浆模衬垫设计提供参考。
英文摘要:
      Structural design method of cushions for large-sized LCD was introduced based on the study of the cushioning mechanism of molded pulp cushion structure. A new type folding and nesting molded pulp cushion structure was put forward with fully consideration of manufacturing feasibility. The structure was optimized and the cushioning performance of the cushioning structure was verified by simulation analysis. The purpose was to provide reference for structural design of cushions for large-sized LCD.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21012535位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号