文章摘要
郭振斌,陈安军.缓冲空气垫静态刚度研究[J].包装工程,2011,32(11):5-7,25.
GUO Zhen-bin,CHEN An-jun.On the Static Stiffness of Air Cushion[J].Packaging Engineering,2011,32(11):5-7,25.
缓冲空气垫静态刚度研究
On the Static Stiffness of Air Cushion
投稿时间:2011-04-16  修订日期:2011-06-10
DOI:
中文关键词: 柱状空气垫  静态刚度  理论模型  准静态试验
英文关键词: column air cushion  static stiffness  theoretical model  quasi-static experiment
基金项目:
作者单位
郭振斌 江南大学 无锡 214122 
陈安军 1.江南大学 无锡 214122 2.国家轻工业包装制品质量监督检测中心 无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      以柱状空气垫为研究对象,在几何压缩模型的基础上,基于准静态压缩中空气垫内气体变化为等温过程,建立了气垫静态刚度与气垫内初始相对内压、压缩变形量关系的理论模型;取规格不同、初始内压相近及规格相同、初始内压不同的空气垫,通过准静态压缩试验,得到了静态刚度并与理论值进行了比较。研究表明,当压缩量较小时,理论模型对空气垫静态刚度的预测较为准确。
英文摘要:
      Column air cushion was taken as object of study. The theoretical model of the static stiffness, initial internal pressure and compression deformation were established in terms of the geometry model based on the isothermal process inside the air cushion. Static stiffness characteristics were obtained from quasi-static compression test, and comparison was made between the models and experimental values of the different specifications and initial internal pressures. The results showed that the static stiffness from theoretical model is more suitable for small compression deformation.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21118179位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号