文章摘要
李增强,章 军,刘光元.苹果被动抓取柔性机械手的结构与分析[J].包装工程,2011,32(15):14-17,47.
LI Zeng-qiang,ZHANG Jun,LIU Guang-yuan.Structure and Analysis of Flexible Manipulator for Apple Passive Grasp[J].Packaging Engineering,2011,32(15):14-17,47.
苹果被动抓取柔性机械手的结构与分析
Structure and Analysis of Flexible Manipulator for Apple Passive Grasp
投稿时间:2011-05-26  修订日期:2011-08-10
DOI:
中文关键词: 绳牵引  柔性关节  机械手  被动抓取  Matlab优化
英文关键词: cable-driven  flexible joint  manipulator  passive grab  Matlab optimization
基金项目:
作者单位
李增强 江南大学 无锡 214122 
章 军 江南大学 无锡 214122 
刘光元 江南大学 无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      为了满足包装生产线上分拣不同大小苹果的要求,设计了一种气动绳牵引的被动抓取的柔性机械手。在满足苹果抓取力的情况下,以抓取最大和最小苹果的力的差值最小为目标函数,采用Matlab软件的fmincon函数优化,得出了2个结构尺寸(a,δ)、扭弹簧的刚度(k)和预紧角(-10)及抓取最小苹果时机械手关节的角度(-2),并给出了机械手的初始状态和气动控制方法。
英文摘要:
      A kind of cable-driven pneumatic flexible manipulator for apple passive grasp was designed to satisfy the requirements of packaging production lines in sorting different sizes of apples. The objective function was determined by the minimum change range of apple grasp strength. Matlab software fmincon function was applied to optimize the function. Two structure sizes a and δ, the stiffness of hydropneumatic twist spring k, preloaded angle -10, and the angle for grasping the smallest apples -2 were resolved. The initial state of manipulator and pneumatic control method was put forward.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20790953位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号