文章摘要
王杨勇,胡剑青,郑智贤,王 锋,涂伟萍.软包装用耐水丙烯酸酯胶黏剂乳液的合成研究[J].包装工程,2011,32(15):74-78.
WANG Yang-yong,HU Jian-qing,ZHENG Zhi-xian,WANG Feng,TU Wei-ping.Synthesis of Acrylic Adhesive Emulsion with Waterproof Property for Soft Packaging Sealing[J].Packaging Engineering,2011,32(15):74-78.
软包装用耐水丙烯酸酯胶黏剂乳液的合成研究
Synthesis of Acrylic Adhesive Emulsion with Waterproof Property for Soft Packaging Sealing
投稿时间:2011-06-09  修订日期:2011-08-10
DOI:
中文关键词: 丙烯酸酯  耐水性  胶黏剂  软包装
英文关键词: acrylate  waterproof  laminating adhesive  soft packaging
基金项目:
作者单位
王杨勇 华南理工大学 广州 510640 
胡剑青 华南理工大学 广州 510640 
郑智贤 华南理工大学 广州 510640 
王 锋 华南理工大学 广州 510640 
涂伟萍 华南理工大学 广州 510640 
摘要点击次数:
全文下载次数:
中文摘要:
      通过半连续种子乳液聚合工艺,成功合成了软包装用耐水丙烯酸酯胶黏剂乳液,并考察了乳化剂、引发剂、种子乳液以及交联单体对乳液性能的影响,测定了乳液平均粒径随反应时间的变化情况。结果表明,各种功能单体、反应性乳化剂均参与了共聚,并且相应基团的红外光谱(FT-IR)特征吸收峰比较明显;当反应性乳化剂(COPS-1/AMPS=1∶1)用量(质量分数)为2.0%~2.5%,引发剂(APS)用量为0.45%,种子乳液用量为8%~10%,交联单体1,6-己二醇二丙烯酸酯(HDDA)用量为8%左右时,丙烯酸酯胶黏剂乳液综合性能最佳。
英文摘要:
      Waterproof acrylic adhesive emulsion for soft packaging was synthesized by the method of multi-step seeded emulsion polymerization. Effects of the emulsifier, initiator, seed emulsion, and cross-linking monomers on adhesive properties were investigated respectively. Average particle size of emulsion was determined with the reaction time. The results showed that the functional monomers and emulsifier all participate in the copolymerization reactions; the absorption peaks of corresponding groups were obviously observed in infrared spectroscopy (FT-IR); acrylic emulsion adhesive has the best combination property when the dosage of reaction type emulsifier(COPS-1/AMPS=1∶1) is 2.0%~2.5wt%, the dosage of initiator(APS) is 0.45wt% , the dosage of seed emulsion is 8%~10wt%, the dosage of HDDA was 8wt%.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20806015位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号