文章摘要
潘 嘹,周洪军,华 岩.Inventor中变螺距螺杆的绘制[J].包装工程,2011,32(21):73-75,89.
PAN Liao,ZHOU Hong-jun,HUA Yan.Drawing of Variable Pitch Screw in Inventor[J].Packaging Engineering,2011,32(21):73-75,89.
Inventor中变螺距螺杆的绘制
Drawing of Variable Pitch Screw in Inventor
投稿时间:2011-08-11  修订日期:2011-11-10
DOI:
中文关键词: 三维造型 变螺距螺杆 包装机械
英文关键词: 3D modeling  variable pitch screw  packaging machinery
基金项目:
作者单位
潘 嘹 江南大学 无锡 214122 
周洪军 江南大学 无锡 214122 
华 岩 江南大学 无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      螺杆是包装机械中常用的物料供送装置,由于Inventor不能直接由曲线方程绘制复杂曲线,导致无法直接用Inventor设计变螺距螺杆,限制了其在包装机械设计中的应用。结合Matlab的函数计算功能和Inventor的三维造型功能,提出了一种变螺距螺杆的绘制方法。结果表明:该方法能够快速、准确地设计变螺距螺杆,弥补了Inventor在复杂零件造型方面的不足,使其能够在机械设计中发挥更大的作用。
英文摘要:
      Screw is a common component of material conveying. Inventor can't be used to draw complicated curve directly by the equation of curve. So variable pitch screw can't be draw directly by using Inventor. For this reason, the use of Inventor in packaging machinery design is limited. A new way of drawing variable pitch screw was put forward by using the 3D modeling function of Inventor combined with function calculation of Matlab. The result showed that through this way, variable pitch screws can be draw easily and accurately. Besides, the weakness of Inventor in drawing complicated component is compensated, and Inventor can be used more widely in machinery design.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20818424位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号