文章摘要
匡小平,于战果,廖荣民.旋转模塑技术在箱式后勤装备研制上的应用[J].包装工程,2011,32(23):54-59.
KUANG Xiao-ping,YU Zhan-guo,LIAO Rong-min.Application of Rotational Modeling Technology in Development of Box Logistic Equipment[J].Packaging Engineering,2011,32(23):54-59.
旋转模塑技术在箱式后勤装备研制上的应用
Application of Rotational Modeling Technology in Development of Box Logistic Equipment
投稿时间:2011-07-08  修订日期:2011-12-10
DOI:
中文关键词: 箱式后勤装备  聚乙烯  共混改性  旋转模塑
英文关键词: box logistic equipment  polyethylene  blending and modification  rotational modeling
基金项目:
作者单位
匡小平 军事交通学院 天津 300161 
于战果 军事交通学院 天津 300161 
廖荣民 军事交通学院 天津 300161 
摘要点击次数:
全文下载次数:
中文摘要:
      通过对比分析与计算,发现滚塑箱具有成本、质量、性能等方面的优势,能够满足箱式后勤装备的战术技术指标和野战条件下设备的包装防护、集装承载和携行运输的需要,提出了将旋转模塑技术广泛应用于箱式后勤装备的研制。研究了适宜箱式后勤装备制造所用原材料——共混改性聚乙烯,并介绍了旋转模塑技术及其制造工艺。
英文摘要:
      Through comparison and analysis, it was found that has advantages in aspects of cost, mass and capability; it can meet the technique indicators of box logistic equipment and satisfy protective packaging, containerizing loading and carried transportation of facilities for field use. Rotational modeling technology was put forward for manufacturing of box logistic equipment. The modified polyethylene resin with blending and modification for manufacturing of box logistic equipment was studied; rotational modeling technology and its processes were introduced.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22558117位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号