引用本文:
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2518次   下载 2200 本文二维码信息
码上扫一扫!
分享到: 微信 更多
考虑层间作用的冷轧钢卷抗凹性分析
刘海江, 郭瑞玲
同济大学, 上海 201804
摘要:
针对冷轧钢卷包装中多层材料的接触变形问题,对钢卷包装系统的抗凹性进行了分析与研究;建立了考虑层间作用的钢卷包装系统的力学模型,计算和分析了钢卷的变形和应力,应用HYPERMESH与ANSYS/LS-DYNA对钢卷抗凹性模型进行了有限元仿真;最后进行了抗凹性模型的冲击试验,验证了有限元仿真计算结果,可为钢卷包装工艺设计提供理论依据。
关键词:  钢卷  层间作用  抗凹性  有限元  冲击试验
DOI:
分类号:TB487; TP391.9
基金项目:
Dent Resistance Analysis of Cold Rolled Steel Coil Considering Interlayer Effect
LIU Hai-jiang, GUO Rui-ling
Tongji University, Shanghai 201804, China
Abstract:
For solving the multi-layer contact deformation problem of cold rolled steel coil, dent resistance of steel coil packaging system was analyzed and studied. Mechanical model of steel coil packaging system considering interlayer effect was established and the strain and stress of the steel coil was calculated and analyzed. FEM simulation of dent resistance of the steel coil was carried out by using HYPERMESH and ANSYS/LS-DYNA. An impact test of the dent resistance model was carried out to verify the FEM simulation. The purpose was to provide theory basis for steel coil packaging process design.
Key words:  steel coil  interlayer effect  dent resistance  FEM  impact test

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第26534544位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号