邵 文,唐正宁.喷墨印刷中墨滴分裂过程的研究[J].包装工程,2012,33(1):88-91.
SHAO Wen,TANG Zheng-ning.Research on Break off Process of Ink Drop in Inkjet Printing[J].Packaging Engineering,2012,33(1):88-91. |
| 喷墨印刷中墨滴分裂过程的研究 |
| Research on Break off Process of Ink Drop in Inkjet Printing |
| 投稿时间：2011-09-27 修订日期：2012-01-10 |
| DOI： |
| 中文关键词: 喷墨印刷 VOF模型 墨滴速度 墨滴分裂 |
| 英文关键词: inkjet printing VOF model ink drop speed ink drop break off |
| 基金项目: |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 基于VOF模型，利用Flow3D软件模拟了墨滴生成和断裂过程。与实验结果对比发现，墨滴分裂时墨水的粘度和表面张力对主副墨丝的形成具有很大影响；表面张力是所研究现象的驱动力，驱动电压对墨丝尾部的速度没有影响。 |
| 英文摘要: |
| Ink drop formation and break off processes were simulated using Flow3D based on VOF model. Comparison was made with experiments. The results showed that viscosity and surface tension of ink has great influence on formation of main and secondary tails of ink drop; surface tension is the driving force behind most of the phenomena; the driving voltage has no impact on the tail-end speed. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号