陈海生.填料对UV胶印油墨性能的影响[J].包装工程,2012,33(15):113-116.
CHEN Hai-sheng.Effect of Fillers on Performance of UV Offset Ink[J].Packaging Engineering,2012,33(15):113-116. |
| 填料对UV胶印油墨性能的影响 |
| Effect of Fillers on Performance of UV Offset Ink |
| 投稿时间：2012-04-05 修订日期：2012-08-10 |
| DOI： |
| 中文关键词: UV油墨 填料 黏度 耐摩擦性 |
| 英文关键词: UV curable ink filler viscosity scuff resistance |
| 基金项目: |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 设计了UV胶印油墨的配方，选用了4种填料分别配制油墨样品，测试了油墨样品的黏度、固化时间、细度及耐摩擦性等主要特性。研究表明：不同种类的填料及其用量对油墨性能的影响不同，所选的4种填料中，选用硫酸钡加填可显著提高油墨层的耐摩擦性；使用二氧化钛加填配制的油墨样品，填料用量为5%（质量分数）时，油墨的细度小，黏度适中，固化时间短，耐摩擦性较高。 |
| 英文摘要: |
| The formula of UV offset ink was designed and 4 different fillers were chosen to make the ink respectively. The ink performance such as viscosity, curing time, fineness and scuff resistance were tested. The results showed that different fillers and different percentage of fillers has different influence on ink performance; scuff resistance can be enhanced obviously by adding barium sulfate; when using titanium dioxide as filler of the ink and the quantity of filler is 5%, small fineness, modest viscosity and short curing time as well as high scuff resistance of ink can be obtained. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号