文章摘要
王 亮,许 瑛.基于平行板式电容传感器的送纸检测系统设计[J].包装工程,2012,33(21):82-85.
WANG Liang,XU Ying.Design of Feeding Paper Detection System Based on Parallel Plate Capacitance Sensor[J].Packaging Engineering,2012,33(21):82-85.
基于平行板式电容传感器的送纸检测系统设计
Design of Feeding Paper Detection System Based on Parallel Plate Capacitance Sensor
投稿时间:2012-08-05  修订日期:2012-11-10
DOI:
中文关键词: 打包设备  电容传感器  送纸机构
英文关键词: packaging machine  capacitance sensor  paper-feeding mechanism
基金项目:江西省科技计划支撑项目资助(20111BBE50029)
作者单位
王 亮 南昌航空大学, 南昌 330063 
许 瑛 南昌航空大学, 南昌 330063 
摘要点击次数:
全文下载次数:
中文摘要:
      分析了送纸机构的工作原理,并对其关键部件进行了设计,将电容传感器应用于书本打包设备送纸机构。 通过机构设计和理论计算,表明该设计可以有效检测出重叠牛皮纸被送出,并对多余纸张进行退回处理,系统检测效率高,动态响应好,满足了设备单张送纸的要求。
英文摘要:
      The working principle of paper feeding mechanism was analyzed and its key components were designed. Capacitive sensor was applied in paper feeding mechanism of book packaging machine. Mechanism design and theoretical calculation showed that the design can detect multiple sheets of kraft paper and return excess paper; the detection system has high efficiency, good dynamic response, and meets the requirements of single sheet feeding.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20818282位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号