文章摘要
段宁宁,陈安军.矩形脉冲激励下斜支承系统易损件的冲击特性研究[J].包装工程,2013,34(7):21-24.
DUAN Ning-ning,CHEN An-jun.Shock Characteristics of Vulnerable Components of Tilted Support System under Rectangular Pulse Excitation[J].Packaging Engineering,2013,34(7):21-24.
矩形脉冲激励下斜支承系统易损件的冲击特性研究
Shock Characteristics of Vulnerable Components of Tilted Support System under Rectangular Pulse Excitation
投稿时间:2013-01-22  修订日期:2013-04-10
DOI:
中文关键词: 易损件  斜支承包装系统  矩形脉冲激励  冲击特性  三维冲击谱
英文关键词: vulnerable component  tilted support packaging system  rectangular pulse excitation  shock characteristics  three-dimensional shock response spectra
基金项目:
作者单位
段宁宁 江南大学, 无锡 214122 
陈安军 1. 江南大学, 无锡 214122
2. 国家轻工业包装制品质量监督检测中心, 无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      以考虑易损件的斜支承包装系统为研究对象,建立了矩形脉冲激励下系统无量纲非线性冲击动力学方程。 利用龙格-库塔数值分析方法求解冲击动力学方程,以易损件加速度响应峰值与脉冲激励幅值之比为易损件的响应指标,脉冲激励时间、系统频率比作为变量,构建了易损件的三维冲击谱。 分析讨论了系统支承角、脉冲激励幅值以及质量比等对冲击响应谱的影响规律。 研究表明:随脉冲激励幅值增加,或随系统支承角减小,易损件加速度响应峰值增加且波动加剧;系统响应对低频率比较为敏感,增加频率比可抑制易损件加速度响应峰值,低频率比时增加质量比可降低易损件加速度响应峰值。 研究结果可为斜支承包装系统的设计提供理论依据。
英文摘要:
      The dimensionless nonlinear dynamical equations of tilted support packaging system with vulnerable components were obtained under rectangular pulse excitation, and the numerical results of the shock response were studied using Runge-Kutta method. Three-dimensional shock response spectra was established with the ratio of the maximum shock response acceleration of the vulnerable components to the peak pulse acceleration, the pulse duration and the frequency ratio of system as three basic parameters. The effects of the angle of system, the peak pulse acceleration and mass ratio on the shock response spectra were discussed. The results showed that with the increase of the peak pulse acceleration, or the decrease of the angle, the maximum shock response acceleration of the vulnerable components increase rapidly, and the effect of low frequency ratio on response of system is particularly sensitive; increasing frequency ratio of the system can obviously decrease the maximum shock response acceleration of the vulnerable components, and the peak of the shock response of the vulnerable components decreases at low frequency ratio by increasing mass ratio. The purpose was to provide academic foundation for design of tilted support packaging system.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22674511位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号