文章摘要
温时宝.夹层结构纸板压缩剪切夹具的改进及其验证[J].包装工程,2013,34(11):72-76.
WEN Shi-bao.Improvement and Verification of Compression Shear Fixture for Sandwich Structure Paperboard[J].Packaging Engineering,2013,34(11):72-76.
夹层结构纸板压缩剪切夹具的改进及其验证
Improvement and Verification of Compression Shear Fixture for Sandwich Structure Paperboard
投稿时间:2013-04-09  修订日期:2013-06-10
DOI:
中文关键词: 夹层结构  压缩剪切  夹具  蜂窝纸板  高强瓦楞复合纸板
英文关键词: sandwich structure  compression shear  fixture  honeycomb paperboard  high-strength corrugated paperboard
基金项目:
作者单位
温时宝 青岛科技大学, 青岛 266042 
摘要点击次数:
全文下载次数:
中文摘要:
      针对国家标准压缩剪切夹具测试夹多种层结构材料的剪切性能时,需要多个夹具,且夹具制作成本高的不足,对其进行了改进:将与试样粘合的加载板改为组合式结构,这样可以制作多组样品粘合板,测试时只需要组装即可,大大降低了夹具制作成本,提高了试验效率,而且样品准备制作更加方便。 通过试验对改进的组合压缩剪切夹具与标准夹具进行了对比验证,结果表明组合夹具与标准夹具相比所得数据稍有差别,但压缩剪切载荷最大值差别在依10% 以内,提高了夹具的制作精度后,组合夹具完全可以代替标准夹具。
英文摘要:
      Testing compression shear properties of sandwich structure by China national standard fixture, we need multiple fixtures when a number of samples are tested, and fixture cost is expensive and inconvenient. We improved the fixture for these defects. The loading plate bonded with sample was changed to assembly structure to make combination compression shear fixture (CCFS). Multiple sets adhesive plate was manufactured cheaply, reducing the production cost of fixture, improving testing efficiency and sample preparation. Contrast verification results by test between standard fixture and CCFS showed that compared with standard fixture, the data obtained by CCFS are slightly different, and maximum value difference of compression load shear is within 10% . It was concluded that CCFS can substitute standard fixture completely after improving manufacture accuracy.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22614502位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号