文章摘要
卢智平,刘真,白韬韬,张建青.SpectroEye 与 i1Pro 台间差软修正方法研究[J].包装工程,2013,34(11):89-92.
LU Zhi-ping,LIU Zhen,BAI Tao-tao,ZHANG Jian-qing.Soft Correction Method of Error between Instruments Using SpectroEye and i1Pro[J].Packaging Engineering,2013,34(11):89-92.
SpectroEye 与 i1Pro 台间差软修正方法研究
Soft Correction Method of Error between Instruments Using SpectroEye and i1Pro
投稿时间:2013-01-26  修订日期:2013-06-10
DOI:
中文关键词: 台间差  软修正  三维拟合
英文关键词: error between instruments  soft correction  3D fitting
基金项目:上海市研究生创新基金项目(JWCXSL1201 和 JWCXSL1302)资助;受上海市研究生教育创新计划资助
作者单位
卢智平 上海理工大学, 上海 200093 
刘真 上海理工大学, 上海 200093 
白韬韬 上海理工大学, 上海 200093 
张建青 上海理工大学, 上海 200093 
摘要点击次数:
全文下载次数:
中文摘要:
      在印刷质量检测中,不同型号测量仪器测量结果差异较大。 针对这一问题,提出了一种三维空间拟合算法,建立了正反向模型,用 i1Pro 和 SpectroEye 这 2 种企业常用的测量设备互相预测,最后计算了预测值与实际测量值之间的色差。 实验结果显示,98% 的色差小于 2,表明该算法具有比较好的结果。
英文摘要:
      In print quality inspection, measuring results from different model of measuring instruments are quite different. A three-dimensional fitting algorithm was put forward to solve this problem. Forward and backward models were established. Measured value of i1Pro and SpectroEye, which were both commonly used in enterprises, were used predict each other. The color difference between the predicted value and the actual measured value was calculated. The experimental results showed that 98% of the color difference is less than 2, indicating that the algorithm has good result.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22628440位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号