文章摘要
寻倩男,雷桥,包建强,黄志英.明胶-酪蛋白酸钠可食性膜的包装性能研究[J].包装工程,2013,34(15):40-45.
XUN Qian-nan,LEI Qiao,BAO Jian-qiang,HUANG Zhi-ying.Packaging Performance of Gelatin-sodium Caseinate Edible Composite Film[J].Packaging Engineering,2013,34(15):40-45.
明胶-酪蛋白酸钠可食性膜的包装性能研究
Packaging Performance of Gelatin-sodium Caseinate Edible Composite Film
投稿时间:2013-06-07  修订日期:2013-08-10
DOI:
中文关键词: 明胶  酪蛋白酸钠  均匀设计  包装性能
英文关键词: gelatin  sodium caseinate  uniform design  packaging properties
基金项目:上海海洋大学水产动物遗传育种中心(ZF1206)
作者单位
寻倩男 上海海洋大学, 上海201306 
雷桥 上海海洋大学, 上海201306 
包建强 上海海洋大学, 上海201306 
黄志英 上海海洋大学, 上海201306 
摘要点击次数:
全文下载次数:
中文摘要:
      采用均匀实验设计方法,研究了明胶、酪蛋白酸钠、甘油添加量和成膜温度对可食性膜各项性能的影响,并确定了最佳的成膜工艺和影响膜各项性能的显著因素。结果表明,实验组C(明胶质量分数为5%,酪蛋白酸钠质量分数为8%,甘油添加比例为14%,成膜温度为55 ℃) 具有良好的包装性能,其拉伸强度为11. 45MPa,伸长率为28. 67%,透光率为92. 3%,雾度为7. 56%,氧气透过率为10. 101 cm3 / (m2 ·d·0. 1 MPa),水蒸气透过系数为1. 69×10-13 g·cm/ (Pa·s·cm2 );甘油添加比例是影响膜拉伸强度、伸长率和水蒸气透过系数最显著的因素,其相应的偏回归系数分别为-0. 901,2. 720 和0. 9662;明胶和酪蛋白酸钠均为影响膜透氧气率的显著因素,可增强膜的阻气性能。
英文摘要:
      Influences of dosage of gelatin, sodium caseinate, and glycerin, and forming temperature on film properties were investigated. The best film forming technology and notable factors influencing film properties were determined. The results showed that the best film forming technology is 5% gelatin, 8% sodium caseinate, 14% glycerol at 50 ℃, by which the tensile strength, elongation, transparency, haze values, gas permeability and water vapor permeability of the film is 11. 45 MPa,28. 67%,92. 3%,7. 56%, 10. 101 cm3 / (m2 ·d·0. 1MPa), and 1. 69×10-13 g·cm/ (Pa· s·cm2 ) respectively; Glycerol proportion is the most significant factor influencing tensile strength, elongation and water vapor permeability of gelatin-sodium caseinate films and the corresponding partial regression coefficent are -0. 901, 2. 720, and 0. 9662 respectively; both gelatin and sodium caseinate content are significant factors influencing gas permeability, which can increase of gas barrier properties.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21018109位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号