文章摘要
王琼琦,陈安军.高速制袋机关键机构运动学分析[J].包装工程,2013,34(15):82-86.
WANG Qiong-qi,CHEN An-jun.Kinematic Analysis of Critical Mechanism of High Speed Bag Machine[J].Packaging Engineering,2013,34(15):82-86.
高速制袋机关键机构运动学分析
Kinematic Analysis of Critical Mechanism of High Speed Bag Machine
投稿时间:2013-06-05  修订日期:2013-08-10
DOI:
中文关键词: 热封机构  运动学  加速度峰值  优化分析
英文关键词: heat sealing mechanism  kinematics  maximum acceleration  optimization analysis
基金项目:
作者单位
王琼琦 江南大学, 无锡214122 
陈安军 1. 江南大学, 无锡214122
2. 国家轻工业包装制品质量监督检测中心, 无锡214122 
摘要点击次数:
全文下载次数:
中文摘要:
      以制袋机热封及切刀传动机构为研究对象,根据运动特点建立了机构模型。通过热封构件运动过程中满足的约束方程,得到了热封构件位置、速度及加速度解析表达式,并进行了算例分析及Pro/ E 运动学仿真。在保证热封构件一定行程要求的基础上,对热封构件加速度进行了优化分析。结果表明,改变机构中构件设计参数可以降低热封构件运动加速度峰值。为机构动力学及振动分析提供理论基础。
英文摘要:
      Mechanical models of heat sealing and cutter mechanism of bag machine were established and simplified according to their motion characteristics. Based on the constraint equation obtaining from heat sealing components motion, analytical expressions of heat sealing location, velocity and acceleration were obtained. The validity of kinematic relations was verified through analysis of examples and Pro/ E simulation. Optimization analysis of acceleration of heat sealing components was carried out on the basis of ensuring fixed route. The results showed that changing the design parameters of components can decrease the maximum acceleration of heat sealing components. The purpose was to provide academic foundation for dynamics and vibration analysis.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21003089位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号