文章摘要
张恒光,杨福馨,卢叶.PE / 热能触发式变色复合膜的制备和性能的研究[J].包装工程,2013,34(21):25-27,70.
ZHANG Heng-guang,YANG Fu-xin,LU Ye.Preparation and Performance of PE Heat Triggered Color Changing Composite Membrane[J].Packaging Engineering,2013,34(21):25-27,70.
PE / 热能触发式变色复合膜的制备和性能的研究
Preparation and Performance of PE Heat Triggered Color Changing Composite Membrane
投稿时间:2013-07-24  修订日期:2013-11-10
DOI:
中文关键词: 复合薄膜  透光率  变色性能
英文关键词: composite membrane  light transmittance  color changing performance
基金项目:国家高技术研究发展863 计划基金(2012AA0992301)
作者单位
张恒光 上海海洋大学, 上海201306 
杨福馨 上海海洋大学, 上海201306 
卢叶 上海海洋大学, 上海201306 
摘要点击次数:
全文下载次数:
中文摘要:
      通过挤出吹塑法制作了聚乙烯薄膜(PE),以流延法制作了热能触发式变色薄膜,通过复合机理把2 种膜复合在一起。通过对复合膜的力学性能和光学性能的研究,发现了复合膜的力学性能和光学性能有所下降,且变色性能略微发生了变化,但保留了根据温度而变色的优良性能。各项指标表明PE/ 热能触发式变色薄膜可以应用于食品包装。
英文摘要:
      PE membrane was prepared by extrusion blow molding method and heat triggered color changing film was prepared by tape casting method. The two kinds of membranes were composited. The mechanical property and the optical performance of the composite film were studied. The results showed that the mechanical properties and optical performance of the composite film is falling; the composite film retains excellent discoloration performance. All of the indicators proved that the PE/ heat triggered color changing composite film can be used in food packaging.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22628702位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号