文章摘要
谢勇,胡亚萍.瓦楞纸箱提手孔形状对抗压强度的影响[J].包装工程,2013,34(21):31-34,56.
XIE Yong,HU Ya-ping.Effect of Handing Hole's Shape on Compressive Strength of Corrugated Box[J].Packaging Engineering,2013,34(21):31-34,56.
瓦楞纸箱提手孔形状对抗压强度的影响
Effect of Handing Hole's Shape on Compressive Strength of Corrugated Box
投稿时间:2013-03-17  修订日期:2013-11-10
DOI:
中文关键词: 瓦楞纸箱  提手孔  抗压强度
英文关键词: corrugated boxes  handing hole  compressive strength
基金项目:
作者单位
谢勇 湖南工业大学, 株洲412008 
胡亚萍 湖南工业大学, 株洲412008 
摘要点击次数:
全文下载次数:
中文摘要:
      对同一规格、不同手孔形状的重型装饰灯具外包装瓦楞纸箱的抗压强度进行了试验,以探讨提手孔形状对纸箱抗压强度的影响。在提手孔形状满足舒适度的前提下,对5 种形状的提手孔进行了试验。试验结果表明,针对瓦楞纸箱抗压强度损失而言,弧形提手孔强度损失最少,梯形提手孔最大,跑道形、山形和半圆形提手孔对纸箱抗压强度的影响程度相差不大。
英文摘要:
      Compressive strength of corrugated boxes for heavy decorative lights packaging was tested. The corrugated boxes had different shape of handing hole. 5 kinds of shape of handing hole were tested on condition of meeting comfort level requirements. The results showed that corrugated box with arc-shaped handing hole has the minimum loss of compressive strength; trapezoidal-shaped handing hole causes the maximum loss; for the runway-shaped, hill-shaped, and half-round-shaped, their loss has little difference.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22594268位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号