文章摘要
薛飞,张炜.跌落冲击试验机的控制和数据采集处理系统[J].包装工程,2013,34(23):54-59.
XUE Fei,ZHANG Wei.Control and Data Acquisition Processing System of Drop Impact Testing Machine[J].Packaging Engineering,2013,34(23):54-59.
跌落冲击试验机的控制和数据采集处理系统
Control and Data Acquisition Processing System of Drop Impact Testing Machine
投稿时间:2013-10-10  修订日期:2013-12-10
DOI:
中文关键词: 跌落冲击  数据采集  数据处理  最小二乘拟合
英文关键词: drop impact  data acquisition  data processing  least-squares fit
基金项目:国家十二五科技支撑项目(2011BAD24B01);宁波市自然科学基金(2011A610154)
作者单位
薛飞 太原科技大学, 太原030024 
张炜 浙江大学宁波理工学院, 宁波315100 
摘要点击次数:
全文下载次数:
中文摘要:
      基于经典的缓冲材料缓冲特性理论,开发了一套跌落冲击试验机系统,并研究了自由跌落冲击过程中的数据采集与处理中的关键问题。通过采用多种数字滤波技术,有效地削弱了随机信号的干扰;利用一种新的获取初速的数据处理方法,使得数据更趋于实际值;通过获取的实验数据,利用最小二乘法进行包装材料缓冲特性的拟合,获得了缓冲材料的缓冲特性曲线。在相同条件下,针对EPE 材料进行了多次跌落冲击试验,实验结果符合经典的缓冲包装材料缓冲特性曲线,实验最大相对误差为3. 7272%。实验表明,试验系统数据采集规范、数据处理方法准确,并验证了试验系统的可靠性,为缓冲包装设计提供了有利的科学依据。
英文摘要:
      A set of drop impact testing machine was developed based on classical cushioning properties theory of cushion material. Key issues of data acquisition and processing of free fall were studied. The interference of random signal was effectively reduced by a variety of digital filtering technology; by using a new data processing method to obtain the initial velocity, the data approaches to the actual value; the buffer curve of cushioning materials was then obtained through the least square fitting of the experimental data. Repeated drop impact experiments of EPE materials were carried out. The results satisfy the classical cushion curve, and the maximum relative error is 3. 7272% of the experimental result. It was concluded that the data acquisition of the experimental system is standard, the data processing method is accurate, and the experimental system is reliable. The purpose was to provide scientific basis for cushion packaging design.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20817501位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号