文章摘要
杨耀,杨成克,吕彩虹,刘全香,刘兴海,黎厚斌.水性 UV 油墨的制备及表征[J].包装工程,2014,35(1):55-60.
YANG Yao,YANG Cheng-ke,LYU Cai-hong,LIU Quan-xiang,LIU Xing-hai,LI Hou-bin.Preparation and Characterization of Water-borne UV-curable Ink[J].Packaging Engineering,2014,35(1):55-60.
水性 UV 油墨的制备及表征
Preparation and Characterization of Water-borne UV-curable Ink
投稿时间:2013-10-20  修订日期:2013-12-01
DOI:
中文关键词: 水性 UV 油墨  高速分散法  配方设计  包装印刷行业
英文关键词: water-borne UV-curable ink  high-speed dispersion method  formulation design  packaging and printing industries
基金项目:广东省教育部产学研结合项目(2011B090400397) ;珞珈青年学者配套项目(217-273483)
作者单位
杨耀 武汉大学, 武汉 430079 
杨成克 武汉大学, 武汉 430079 
吕彩虹 武汉大学, 武汉 430079 
刘全香 武汉大学, 武汉 430079 
刘兴海 武汉大学, 武汉 430079 
黎厚斌 武汉大学, 武汉 430079 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了确定水性 UV 油墨的制备、表征及其配方。 方法 采用高速分散法将连接料、颜料、去离子水和助剂分散均匀即可制得水性 UV 油墨,探讨了连接料的含量、光固化时间对水性 UV 油墨附着牢度的影响,以及光引发剂用量、墨膜厚度对墨膜光固化时间的影响。 结果 连接料的较佳质量分数为 60% ,墨膜的适宜固化时间为 6 s,光引发剂的较佳用量为 2% ,墨膜的适合厚度为 10 滋m。 当m( 连接料) : m( 颜料) : m( 乙醇和水) : m( 光引发剂) = 6 : 1 : 2 . 8 : 0 . 2 时,水性 UV 油墨的综合性能较佳。 结论 该水性 UV 油墨具有干燥速度快、无污染、印刷质量高等优点,可广泛应用于包装印刷行业。
英文摘要:
      Objective To investigate the preparation, characterization and determination of optimal formula of water-borne UV-curable inks. Methods The binder, pigments, deionized water and additives were dispersed evenly through high- speed dispersion method, then the water-borne UV-curable ink was prepared. The influence of the percentage of binder and the curing time on the adhesion of water-borne UV-curable ink, as well as the effects of the dosage of photoinitiator and the thickness of ink films on the speed of UV curing were discussed. Results The optimal percentage of binder was 60% ; the perfect curing time of ink film was 6 s; the first-rate dosage of photoinitiator was 2% ; the most suitable thickness of ink film was 10 microns; the comprehensive performance of waterborne UV-curable ink was the best when m ( binder ) : m ( pigment ) : m ( ethanol and water) : m ( photoinitiator) = 6 : 1 : 2. 8 : 0. 2. Conclusion This water-borne UV-curable ink with advantages of fast drying, no pollution and high printing quality, can be widely used in the packaging and printing industry.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20988408位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号