文章摘要
孙德强,孙玉瑾,郑波波,王庆庆,李文娥,王晨阳,孙建建.正方形蜂窝芯材共面冲击力学性能[J].包装工程,2014,35(3):1-5.
SUN De-qiang,SUN Yu-jin,ZHENG Bo-bo,WANG Qing-qing,LI Wen-e,WANG Chen-yang,SUN Jian-jian.In-plane Dynamics of Square Honeycomb Cores[J].Packaging Engineering,2014,35(3):1-5.
正方形蜂窝芯材共面冲击力学性能
In-plane Dynamics of Square Honeycomb Cores
投稿时间:2013-12-01  修订日期:2014-01-01
DOI:
中文关键词: 正方形蜂窝芯材  共面冲击  变形模式  动态峰应力
英文关键词: square honeycomb cores  in-plane impact  deformation mode  dynamic plateau stress
基金项目:陕西省自然科学基金项目(2010JQ1011) ;陕西省教育厅专项研究计划项目(11JK0534) ;陕西科技大学博士启动金项目( BJ12-15) ;陕西省 2013 年大学生创新创业训练项目
作者单位
孙德强 陕西科技大学, 西安 710021 
孙玉瑾 西安理工大学高科学院, 西安 710109 
郑波波 陕西科技大学, 西安 710021 
王庆庆 陕西科技大学, 西安 710021 
李文娥 陕西科技大学, 西安 710021 
王晨阳 陕西科技大学, 西安 710021 
孙建建 陕西科技大学, 西安 710021 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究正方形蜂窝芯材在共面冲击载荷作用下的力学行为。 方法 借助于有限元软件ANSYS / LSDYNA,建立了相应基于单元阵列的有限元模拟和分析方法。 结果 随着冲击速度的增加,正方形蜂窝表现为不同的变形模式,其冲击响应的力- 位移曲线包含了具有明显不同特征的 4 个阶段,对于给定结构参数的正方形蜂窝样品,在不同冲击速度下会呈现出不同的变形模式。 计算出了不同冲击速度下不同壁厚边长比的正方形蜂窝芯材的动态峰应力。 结论 正方形蜂窝芯材的动态峰应力,是其静态峰应力和因惯量引起的峰应力增量之和;静态峰应力与正方形蜂窝芯材的相对密度成正比,峰应力增量与冲击速度的平方成正比,而相对密度又取决于壁厚边长比。 最后拟合得到了动态峰应力关于壁厚边长比和冲击速度的经验公式。
英文摘要:
      Objective To study the mechanical behaviors of square honeycombs cores under the in- plane dynamic impact loadings. Methods Corresponding finite element simulation and analysis methodology based on cell array was established using the ANSYS / LSDYNA tool. Results With the increasing impact velocities, different deformation modes were observed. The force-displacement curves included four regimes with distinct characteristics. Different deformation modes were observed for a specimen with given configuration parameters at different impact velocities. The dynamic plateau stresses were calculated for the square honeycombs cores with different t / l ratios at different in- plane impact velocities. Conclusion The dynamic plateau stress was the sum of the static plateau stress and the dynamic enhancement due to the inertia effect. The static plateau stress was proportional to the relative density of square honeycombs cores. The dynamic enhancement stress was proportional to the square of impact velocity and the relation coefficient depended on the t / l ratios. The empirical formula of dynamic plateau stress in terms of t / l ratio and impact velocity was given.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20788578位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号