文章摘要
刘继飞,韩雪山,王伟,葛杰.蠕变对发泡聚乙烯缓冲性能影响的研究[J].包装工程,2014,35(3):48-51,63.
LIU Ji-fei,HAN Xue-shan,WANG Wei,GE Jie.Effects of Cushion Property of Foamed Polyethylene EPE Cushioning Material Exerted by the Creep[J].Packaging Engineering,2014,35(3):48-51,63.
蠕变对发泡聚乙烯缓冲性能影响的研究
Effects of Cushion Property of Foamed Polyethylene EPE Cushioning Material Exerted by the Creep
投稿时间:2013-12-11  修订日期:2014-01-01
DOI:
中文关键词: EPE  蠕变  永久变形  最大加速度  缓冲系数
英文关键词: EPE  creep  permanent deformation  maximum acceleration  cushion coefficient
基金项目:
作者单位
刘继飞 天津科技大学, 天津 300222 
韩雪山 中国包装科研测试中心, 天津 300457 
王伟 中国包装科研测试中心, 天津 300457 
葛杰 天津科技大学, 天津 300222 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究发泡聚乙烯( EPE) 缓冲衬垫在受到内装产品长期静态压载后的缓冲特性变化规律。方法 设定 2 个不同负载(15 . 3 ,22 . 2 kg) 模拟某一类电子产品自重,并设置对照组,预载时间为 72 h,进行静、动态缓冲特性实验,对比分析 EPE 产生不同程度的永久变形后,在不同预载量下的应力- 应变曲线、最大加速度-静应力曲线及缓冲系数-最大应力曲线。 结果 预载使 EPE 静压的屈服阶段变短,吸能特性降低,最小加速度增大,最小缓冲系数增大。 结论 蠕变会显著降低 EPE 的缓冲性能,在对发泡材料进行缓冲特性研究时,应增加对材料初始形态的预处理,使其更加符合实际使用状况。
英文摘要:
      Objective To analyze the changing characteristics of foamed polyethylene EPE cushion after a long time of product loading. Methods Two different load weights (-15. 3, 22. 2 kg) were set to simulate the weight of certain electronic product in this controlled study, with a preloading of 72 h, and the deformation of the internal buffer material after long time stacking compression was checked. Then the stress-strain curves, the maximum acceleration-static stress curves and cushion coefficient-maximum static stress curves under two different pre-loading weights were compared. Results Preloading could shorten the yield segments, decrease the property of energy-absorbing, and increase the minimal acceleration values and minimal cushion coefficient values. Conclusion Preloading could greatly weaken the cushioning performance of EPE buffer material. It is recommended that pre-conditioning should be done prior to the dynamic test for expanded materials, therefore it could better resemble the actual using condition.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20792176位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号