钟昌清,张永林.高速分件供送螺杆的模态分析[J].包装工程,2014,35(3):69-73,122.
ZHONG Chang-qing,ZHANG Yong-lin.Modal Analysis on the High-speed Timing Screw[J].Packaging Engineering,2014,35(3):69-73,122. |
| 高速分件供送螺杆的模态分析 |
| Modal Analysis on the High-speed Timing Screw |
| 投稿时间：2013-11-05 修订日期：2014-01-01 |
| DOI： |
| 中文关键词: 高速分件供送螺杆 螺旋线分布规律 固有频率 模态分析 |
| 英文关键词: high-speed timing screw distribution of helix natural frequency modal analysis |
| 基金项目: |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 为了减小高速分件供送螺杆在高速运行时可能产生的振动。 方法 基于一类通用的供送螺杆分段方法和数学模型,构造了 4 种螺旋线分布规律不同的分件供送螺杆,分别对 4 种螺杆进行了结构设计和模态分析。 结果 在分件螺杆静止、不受外界载荷情况下,4 种方案的各阶固有频率和振型的相关数据相差不大,特别是一阶模态最大相差只有 4 Hz。 在分件螺杆以 5 rad / s 的速度转动,并受到 300 N 的外界载荷情况下,4 种方案的各阶固有频率和振型的相关数据相差较大,特别是方案4 与方案 3 的三阶模态相差 300 Hz。 结论 通过比较 4 种分件供送螺杆模态分析结果,得出了相对较佳的、适用于高速供送的螺旋线分布规律。 螺纹线的分布规律对静止状态下分件供送螺杆的固有频率影响不大。 当螺杆高速转动,螺纹线的变速规律遵循“ 尿盆冶 曲线变化规律时,即被供送件加速度先增加而后不变再后减小时,可以减小高速分件供送螺杆的振动。 |
| 英文摘要: |
| Objective To reduce the vibration of the high-speed timing screw under the condition of high speed. Methods Based on a class of general methods and mathematical models for timing screw, four kinds of high-speed timing screw with different spiral distribution regularity were designed. And structure design and modal analysis were conducted for four kinds of screws. Results There was little difference among the 4 solutions in each order natural frequency and vibration model, when the high-speed timing screw was in stationary state and free of load. Especially, the first order modal had a maximal difference of only 4 Hz. However, there was a big difference among the 4 solutions in each order natural frequency and vibration model, when the high-speed timing screw rotated at a speed of 5 rad / s and had a force of 300 N. Especially the plan 4 and 3 thirdorder modal have a 300 Hz difference. Conclusion The best distribution regularity of helix was concluded by comparing the four points and the results of a screw modal analysis. When the high- speed timing screw was in stationary sate, the influence caused by different spiral distribution regularity was little. But when the high-speed timing screw rotated at a high speed, the spiral distribution regularity called 'niao pen' could reduce the vibration of the high-speed timing screw. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501716号