文章摘要
宋卫生.饮料瓶口径与饮用舒适度关系研究[J].包装工程,2014,35(11):38-41.
SONG Wei-sheng.Relation between Drinking Comfort and Opening Size of Beverage Bottles[J].Packaging Engineering,2014,35(11):38-41.
饮料瓶口径与饮用舒适度关系研究
Relation between Drinking Comfort and Opening Size of Beverage Bottles
投稿时间:2014-02-08  修订日期:2014-06-01
DOI:
中文关键词: 饮料瓶  舒适度  饮用感觉  流动速度  开口尺寸
英文关键词: beverage bottle  comfort  drinking feeling  flow rate  opening si
基金项目:
作者单位
宋卫生 河南牧业经济学院 郑州 450046 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了提高消费者在直接使用饮料瓶饮用饮料时的舒适度, 研究瓶口直径对饮用舒适度的影响。 方法 组织 160名学生志愿者针对瓶口直径分别为 28, 33, 38 mm的饮料瓶饮用舒适度进行调查。 结果 饮用舒适度受液流状况及其可调性等因素的影响。 在此基础上, 建立了流体分析模型来模拟消费者饮用时的瓶装液体, 通过仿真分析理解了消费者在饮用饮料过程中通过改变饮料瓶倾斜角度来控制流速, 并达到最佳饮用感觉。 结论 调查统计结果表明, 对于成年消费者直径为 33 mm的瓶口的舒适度最佳,而且该尺寸与消费者性别以及消费者嘴的大小无关。
英文摘要:
      Objective To study the effects of the beverage bottle opening size on drinking feelings in order to elevate the comfort of consumers when drinking from the bottles. Methods An investigation over 160 cases was performed based on a drinking feelings test using three kinds of bottles with opening diameters of 28, 33 and 38 mm, respectively. Results The factor analysis results showed that the drinking feeling was affected by factors such as the flow from the bottle to the mouth and the flow adjustability. Moreover, a finite fluid analysis model was developed to simulate the bottled liquid in a drinking action. Through the simulation analysis, we understood how consumers control the flow rate during the drinking actions to realize the ideal feeling by adjusting the inclination angle of the bottle. Conclusion Statistical analysis results showed that 33 mm opening was the optimum for adult consumers regardless of the gender and the mouth size.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20792578位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号