文章摘要
宋晓利,张改梅,王灿,王俊程,郑永龙.基于有限元法的缓冲材料力学性能分析[J].包装工程,2014,35(19):25-28.
SONG Xiao-li,ZHANG Gai-mei,WANG Can,WANG Jun-cheng,ZHENG Yong-long.Analysis of Mechanical Properties for Cushioning Materials Based on Finite Element Method[J].Packaging Engineering,2014,35(19):25-28.
基于有限元法的缓冲材料力学性能分析
Analysis of Mechanical Properties for Cushioning Materials Based on Finite Element Method
投稿时间:2014-01-04  修订日期:2014-10-01
DOI:
中文关键词: 有限元分析  缓冲材料  力学性能  应力
英文关键词: finite element analysis  cushioning material  mechanical properties  stress
基金项目:国家自然科学基金项目(51305038); 北京市委组织部优秀人才项目(2013D0050040070003); 北京印刷学院校级科技重点项目(F-a-2013-16)
作者单位
宋晓利 北京印刷学院 北京 102600 
张改梅 北京印刷学院 北京 102600 
王灿 北京印刷学院 北京 102600 
王俊程 北京印刷学院 北京 102600 
郑永龙 北京印刷学院 北京 102600 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 基于有限元法对发泡聚乙烯(EPE)缓冲包装材料的力学性能进行分析。 方法 基于有限元法研究缓冲材料的厚度、压板的施压速度对EPE 缓冲包装材料的应力分布及应力应变曲线的变化情况。 结果 随着缓冲材料厚度的增加, 最大应力从1.646 kPa逐渐减小到 0.624 kPa, 材料屈服点的应力从 41.700 Pa 逐渐降低到 14.727 Pa。 随着施压速度的增加, 压板与 EPE 接触边缘的最大应力由1.646 kPa逐渐增大到 8.617 kPa, 应力上升开始点的应力从23.497 Pa逐渐增大到 144.978 Pa。 结论 应力主要分布在压板与缓冲材料接触边缘。 随着缓冲材料厚度的增加, 最大应力逐渐减小。 随着施压速度的增加,压板与 EPE 接触边缘最大应力逐渐增大,且EPE 缓冲材料内部受力区域逐渐增大。
英文摘要:
      Objective The mechanical properties of expanded polyethylene (EPE) were analyzed based on the finite element method. Methods The stress distribution and the stress-strain variation curves of EPE for different thickness and velocity were explored based on the finite element approach. Results With the increase of thickness of EPE, the maximum stress was reduced from 1.646 kPa to 0.624 kPa and the stress of the yield point was reduced from 41.700 Pa to 14.727 Pa. With the increase of velocity, the maximum stress on the contact edge between the plate and EPE increased gradually from 1.646 kPa to 8.617 kPa and the stress of the rising point increased gradually from 23.497 Pa to144.978 Pa. Conclusion The stress was mainly distributed on the contact edge between the plate and EPE. With the increase of thickness, the maximum stress decreased gradually. With the increase of velocity, the maximum stress on the contact edge between the plate and EPE increased gradually, and the internal stress region of EPE also increased gradually.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21369146位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号