文章摘要
马赛,曹春平,孙宇.基于CCD的金属薄板印刷墨层厚度在线检测研究[J].包装工程,2014,35(23):120-125.
MA Sai,CAO Chun-ping,SUN Yu.Online Detection of the Ink Film Thickness of Metal Sheet Printing Based on CCD Method[J].Packaging Engineering,2014,35(23):120-125.
基于CCD的金属薄板印刷墨层厚度在线检测研究
Online Detection of the Ink Film Thickness of Metal Sheet Printing Based on CCD Method
投稿时间:2014-06-11  修订日期:2014-12-10
DOI:
中文关键词: CCD机器视觉  金属薄板  墨层厚度  极限学习机
英文关键词: CCD machine vision  metal sheet printing  ink film thickness  Extreme Learning Machine
基金项目:江苏省前瞻性联合研究项目 (BY20140004-03)
作者单位
马赛 南京理工大学南京 210094 
曹春平 南京理工大学南京 210094 
孙宇 南京理工大学南京 210094 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 根据金属薄板印刷质量控制的发展趋势和金属薄板印刷的特点, 提出了基于CCD机器视觉的金属薄板印刷机墨层厚度在线检测系统。方法 通过实验获取信号条的墨层厚度 d与实时图片的 RGB 值, 分析由 RGB 值推得的亮度 L*、 饱和度C*ab和色调角 hab与墨层厚度间的对应关系; 通过极限学习机(ELM)对亮度、 饱和度、 色调角与墨层厚度数据进行回归拟合, 建立墨层厚度预测模型。结果 墨层厚度 d与 L*,C*ab和 hab之间存在显著的对应关系。拟合的平均相对误差为2.27%, 最大相对误差为7.33%, 测量误差低于8%。结论 较好地实现了在线墨层厚度检测, 具有很好的实际应用价值。
英文摘要:
      Objective The detection of ink film thickness of metal sheet printing is one of the key technologies in the printing quality control field. According to the development trend and the characteristics of metal sheet printing, an online detection system was proposed for the ink film thickness of metal sheet printing. Methods First, the ink film thickness d and real-time image's RGB values of the signal bars were obtained through experiments. Then, the relationships of the basic attributes of colors (lightness (L*), saturation (C*ab) and hue (hab)) calculated from the RGB values and the thickness of the ink film were analyzed and the significant corresponding relationships among them were found. Last, an ink film thickness prediction model was established using Extreme Learning Machine (ELM). Results The simulation results showed that the accuracy of the ELM method was much higher than BP and RBF methods with the average relative error of 2.27%, and the maximum relative error of 7.33%. Conclusion It was proved that this detection system could well realize the function of ink film thickness detection and could be applied to the actual testing process.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20795568位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号