周清华,杨萍,肖吉军,李希秀.基于位置加权法的包装流水线平衡[J].包装工程,2014,35(23):153-158.
ZHOU Qing-hua,YANG Ping,XIAO Ji-jun,LI Xi-xiu.Balancing Line of Packaging Business Based on Positional Weight Method[J].Packaging Engineering,2014,35(23):153-158. |
| 基于位置加权法的包装流水线平衡 |
| Balancing Line of Packaging Business Based on Positional Weight Method |
| 投稿时间：2014-03-05 修订日期：2014-12-10 |
| DOI： |
| 中文关键词: 流水线平衡 位置加权法 生产管理 工业工程 |
| 英文关键词: balancing of production line positional weight method production management industrial engineering |
| 基金项目: |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 研究某企业电动铅笔刨包装生产线工序优化与生产线平衡。方法 应用工业工程分析方法， 对企业的原生产线及流程进行改造， 根据电动铅笔刨包装生产线的生产工艺特点， 运用生产流水线平衡的位置加权法合理调整生产工序， 同时对作业内容、 作业人员和设备及设施布置进行重新分配和调整。结果 与原生产线方案相比较， 平衡后电动铅笔刨包装生产线流水线平衡率提高了31%， 流水线作业人员减少4人， 提高了订单交付水平， 生产线布局保证了生产过程的流畅性， 满足了计划产量生产要求。结论 采用位置加权法， 结合工序优化、 分解与合并， 可以获得较好的生产流水线平衡效果。 |
| 英文摘要: |
| Objective To study the process optimization and production line balancing of the electric pencil sharpener packaging line in a company. Methods Industrial engineering analysis methods were applied to improve its old packaging lines and process. According to the characteristics of the electric pencil sharpener production process, the position weighting method of production line balancing was used to rebuild a reasonable production process. At the same time, job contents, equipments, facility layouts, and operators were reassigned and adjusted. Results Compared with the original solutions, the balancing rate of the new one showed an increase of 31%, and the staff number was reduced by 4, and the order delivery rates were improved. The new layout ensured the smooth operation of the production line and met the demands of the designed output. Conclusion Using the positional weight method, combined with process optimization, decomposition and combination, better results of the production line balancing were obtained. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501716号