文章摘要
王永涛,乔晓龙,崔冬冬,陈默.单体比例对丙烯酸酯水性上光油性能的影响[J].包装工程,2015,36(3):48-53.
WANG Yong-tao,QIAO Xiao-long,CUI Dong-dong,CHEN Mo.Effects of Monomer Ratio on the Waterborne Varnish Properties of Acrylate[J].Packaging Engineering,2015,36(3):48-53.
单体比例对丙烯酸酯水性上光油性能的影响
Effects of Monomer Ratio on the Waterborne Varnish Properties of Acrylate
投稿时间:2014-06-07  修订日期:2015-02-10
DOI:
中文关键词: 单体比例  丙烯酸酯  水性上光油
英文关键词: monomer ratio  acrylate  waterborne varnish
基金项目:国家级大学生创新创业训练计划 (201310446034);山东省优秀中青年科学家科研奖励基金 (BS2012CL019);广东省产品包装与物流普通高校重点实验室开放基金 (2011008)
作者单位
王永涛 曲阜师范大学日照 276800 
乔晓龙 曲阜师范大学日照 276800 
崔冬冬 曲阜师范大学日照 276800 
陈默 曲阜师范大学日照 276800 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 探究聚合软硬单体比例对水性上光油性能的影响。方法 以丙烯酸丁酯(BA)、 甲基丙烯酸甲酯(MMA)为软硬单体, 过硫酸铵为引发剂, 采用半连续自由基乳液聚合方式合成目标上光油,通过改变配方中软硬单体的质量比, 分析单体比例对水性上光油的成膜性、 吸水率、 玻璃化转变温度, 以及涂覆后的明度、 光滑度、 耐磨性和耐水性等性能的影响。结果 软硬单体质量比在17∶13到2∶3(接近1∶1)时, 由于亲水与疏水基团的共同作用, 水性上光油成膜性、 明度、 光滑度和耐磨性达到最佳。结论 实验合成的环保水性上光油具有优良的成膜性和透明度, 可以满足印刷品和纸包装材料涂覆时的综合性能要求。
英文摘要:
      To discuss the effects of the polymerizing soft and hard monomer ratio on the waterborne varnish properties of acrylate. Waterborne acrylate varnish was prepared by semi-continuous radical emulsion polymerization using butyl acrylate (BA) and methyl methacrylate (MMA) as the soft and hard monomers, and ammonium persulfate as the initiator. By changing the mass ratio of soft monomer and hard monomer in the formula, the effects of monomer ratio on the properties of waterborne acrylate were analyzed, including film-forming property, water absorption and the glass transition temperature as well as its transparency, smoothness, wear resistance and water resistance after coating. The film-forming property, transparency, smoothness and wear resistance of the waterborne varnish were optimal when the soft and hard monomer ratio was 17∶13~2∶3 (close to 1∶1) due to the interactions between hydrophobic and hydrophilic groups. The environment friendly waterborne vanish synthesized by the experiment had excellent film-forming property and transparency, which could meet the comprehensive performance requirements for coating of print and paper packaging materials.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21398029位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号