文章摘要
徐国宝,杨红亮,石卓栋,徐志刚.基于视觉寻口的旋盖压盖一体机设计[J].包装工程,2015,36(7):57-60.
XU Guo-bao,YANG Hong-liang,SHI Zhuo-dong,XU Zhi-gang.Design of Cap Screwing-Pressing Machine Based on Visual Positioning[J].Packaging Engineering,2015,36(7):57-60.
基于视觉寻口的旋盖压盖一体机设计
Design of Cap Screwing-Pressing Machine Based on Visual Positioning
投稿时间:2014-09-13  修订日期:2015-04-10
DOI:
中文关键词: 闭口铁桶  视觉寻口  旋盖  压盖
英文关键词: mouth-closed iron drum  visual positioning  cap screwing  cap pressing
基金项目:
作者单位
徐国宝 北京航天斯达新技术装备公司北京 100076 
杨红亮 北京航天斯达新技术装备公司北京 100076 
石卓栋 北京航天斯达新技术装备公司北京 100076 
徐志刚 北京航天斯达新技术装备公司北京 100076 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 解决闭口铁桶封口设备存在的寻口速度慢、 封口效率低和设备可靠性差的问题。方法 设计了一种封口设备, 采用视觉寻口技术实现寻口操作, 同时将旋盖和压盖等2道工序设计在同一工位完成。结果 寻口快速准确, 并且只需对桶口定位1次, 即可完成旋盖和压盖等2道工序。结论 该设备经实际应用, 工作可靠, 封口效率高。
英文摘要:
      The aim of this study was to solve the existing problems of sealing device for mouth-closed iron drums such as slow searching speed, low sealing efficiency and poor reliability. A sealing device was designed, which fixed sprue using visual positioning technique, and the two processes of cap screwing and cap pressing were simultaneously finished at the same work station. The mouth was located quickly and precisely. Only one localization was required for the completion of the two procedures of cap screwing and cap pressing. The practical application showed that the device was reliable and had high sealing efficiency.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22614894位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号