文章摘要
陈家祥,唐正宁,王莎莎,缪斌鹰.柔印网纹辊油墨转移特性研究[J].包装工程,2015,36(7):134-137,144.
CHEN Jia-xiang,TANG Zheng-ning,WANG Sha-sha,MIAO Bin-ying.Ink Transfer Characteristics in the Flexographic Printing Process[J].Packaging Engineering,2015,36(7):134-137,144.
柔印网纹辊油墨转移特性研究
Ink Transfer Characteristics in the Flexographic Printing Process
投稿时间:2014-09-15  修订日期:2015-04-10
DOI:
中文关键词: 柔印  网纹辊  有限元  油墨转移
英文关键词: flexographic printing  anilox roller  finite element method  ink transfer
基金项目:
作者单位
陈家祥 江南大学无锡 214122 
唐正宁 江南大学无锡 214122 
王莎莎 江南大学无锡 214122 
缪斌鹰 江南大学无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究网纹辊向印版进行油墨转移的特性。方法 将网纹辊结构简化为轴对称的梯形槽, 使用有限元法对网纹辊油墨转移过程进行数值模拟, 即模拟油墨从网纹辊向印版进行转移, 并且加入网纹辊和印版滚筒的运动情况, 研究了接触角、 梯形槽高宽比和角速度对油墨转移的影响。结果 分析了油墨从网纹辊转移到印版的影响因素, 油墨转移率随着上板接触角的增加而减小, 随着梯形槽接触角的增大而增大, 梯形槽高宽比越小和角速度越大, 油墨转移率越高。结论 通过对柔印网纹辊油墨转移情况进行数值模拟, 得到了接触角、 梯形槽高宽比及角速度对油墨转移情况的影响规律, 为柔印生产实践提供了理论参考。
英文摘要:
      The aim of this work was to study the transfer properties of ink between the anilox roller and the plate during printing. The structure of the anilox roller was simplified into an axisymmetric trapezoidal groove, and the ink transfer process was numerically simulated using the finite element method, to simulate the ink transfer from the anilox roller to the plate. The influences of the contact angle, trapezoidal groove aspect ratio and the angular velocity on the ink transfer were studied considering the movement of the anilox roller and the plate cylinder. The influencing factors on ink transfer from the anilox roller to the plate were analyzed, and it was found that the ink transfer ratio decreased with the increasing upper plate contact angle and increased with the increasing dovetail groove contact angle; while the smaller the aspect ratio and the larger the angular velocity, the higher the ink transfer rate. The influencing rules of the contact angle, the aspect ratio and the angular velocity on the ink transfer were obtained by numerical simulation of the ink transfer in the flexographic printing process, which provided theoretical reference for the flexographic printing production.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22595129位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号