文章摘要
杨光照,章军.片弹簧骨架气动柔性手爪抓持苹果分析[J].包装工程,2015,36(15):91-94.
YANG Guang-zhao,ZHANG Jun.Apple Grasping Analysis of Flexible Pneumatic Gripper with Leaf Spring Skeleton[J].Packaging Engineering,2015,36(15):91-94.
片弹簧骨架气动柔性手爪抓持苹果分析
Apple Grasping Analysis of Flexible Pneumatic Gripper with Leaf Spring Skeleton
投稿时间:2014-12-15  修订日期:2015-08-10
DOI:
中文关键词: 片弹簧  悬臂梁  大变形  柔性手爪
英文关键词: leaf spring  cantilever beam  large deformation  flexible gripper
基金项目:
作者单位
杨光照 江南大学无锡 214122 
章军 1. 江南大学无锡 2141222. 江苏省食品先进制造装备重点实验室无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 提出片弹簧骨架气动柔性手爪, 以苹果为对象对抓持全过程进行研究。方法 片弹簧大变形状态分析等效于悬臂梁, 利用微分方法和Matlab编程, 求解该大变形的非线性微分方程。结果 建立了驱动负载、 抓持负载下的力学模型, 求解出了手爪片弹簧大变形和稳定抓持时所需的气缸压强,为该柔性手爪的应用提供了依据。结论 该柔性手爪可以实现对目标抓持物的稳定抓持。
英文摘要:
      This study aimed to propose a kind of flexible pneumatic gripper with leaf spring skeleton and made analysis on the griping process with apples. The deformation of the leaf spring can be equivalent to the large deflection deformation of the elastic cantilever beam, and the differential method was used to solve the large deformation equation with help of MATLAB. Static model of the cantilever had been built both under driving load and grasping load. The deformation of the leaf spring and the required pressure were solved using a differential method. The flexible gripper can steadily grasp the objective and it will have a broad prospect in the fruit sorting field because of the strong self-adaptability.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22594464位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号