文章摘要
张丹静,石秀东,梁小龙,范亚运.纸盒灌装设备吸包机构凸轮型线优化[J].包装工程,2015,36(15):113-118.
ZHANG Dan-jing,SHI Xiu-dong,LIANG Xiao-long,FAN Ya-yun.Optimal Design of Gripping Pack Mechanism Cam Profile of the Filling Equipment[J].Packaging Engineering,2015,36(15):113-118.
纸盒灌装设备吸包机构凸轮型线优化
Optimal Design of Gripping Pack Mechanism Cam Profile of the Filling Equipment
投稿时间:2014-12-26  修订日期:2015-08-10
DOI:
中文关键词: 凸轮连杆机构  ADAMS  凸轮型线  逆向  曲率
英文关键词: cam and connecting rod  ADAMS  cam profile  reverse  curvature
基金项目:
作者单位
张丹静 江南大学无锡 214122 
石秀东 江南大学无锡 214122 
梁小龙 江南大学无锡 214122 
范亚运 江南大学无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 对纸盒灌装设备的吸包机构凸轮型线进行优化。方法 通过对机构自由度的研究, 得出吸包头运动与凸轮型线为一一对应关系, 基于此对吸包机构进行基于ADAMS的仿真, 得到不同时间组合下凸轮的理论型线, 通过对凸轮型线压力角和曲率进行分析, 获得最优凸轮型线。结果 对比发现,优化后凸轮型线的位移、 速度、 加速度曲线过渡部分更加光顺, 悬停吸包时速度和加速度均为0, 吸包过程可靠性高。结论 基于ADAMS的凸轮型线逆向求解优化方法可行, 结果可信度高。
英文摘要:
      This study aimed to optimize the cam profile of gripping pack mechanism. The one-to-one relationship between movement role of the top of the mechanism and the cam profile was obtained by analyzing the degree of freedom. The simulation study was carried out by using ADAMS based on the one-to-one relationship. The cam theory profiles of different combination of time were recorded. The optimal cam theory profile parameter was achieved by researching the pressure angle and curvature. After the optimization, the transition parts of displacement curve, speed curve and acceleration curve were more fairing. The speed of hovering absorbing pack was zero, indicating the improvement of reliability. Taken together, reverse optimum design for gripping pack mechanism based on ADAMS is feasible, which showed highly reliable result and apparent effect.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22594393位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号