文章摘要
蔡建,徐淑权,秦旭锋.基于轻量化目标的发射箱纤维增强材料铺层设计[J].包装工程,2016,37(3):46-49.
CAI Jian,XU Shu-quan,QIN Xu-feng.Overlay Design of Fiber-reinforced Material of Launch Box Based on the Target of Lightweight[J].Packaging Engineering,2016,37(3):46-49.
基于轻量化目标的发射箱纤维增强材料铺层设计
Overlay Design of Fiber-reinforced Material of Launch Box Based on the Target of Lightweight
投稿时间:2015-07-17  修订日期:2016-02-10
DOI:
中文关键词: 复合材料发射箱  纤维增强材料  铺层设计
英文关键词: composite launch box  fiber-reinforced material  overlay design
基金项目:
作者单位
蔡建 中国兵器工业第五九研究所重庆 400039 
徐淑权 中国兵器工业第五九研究所重庆 400039 
秦旭锋 中国兵器工业第五九研究所重庆 400039 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 以某型发射箱复合材料箱体为对象, 探讨复合材料箱体的纤维增强材料铺层设计方法。方法 以箱体质量为控制为目标, 运用复合材料层合板力学理论结合有限元分析方法进行纤维增强材料铺层计算。结果 将纤维的体积分数控制在43.6%, 箱体玻璃纤维布铺层总数量为10层, 可实现箱体的质量控制目标为 (23±1) kg。结论 获得的纤维增强材料铺层方式可有效保证箱体的质量一致性和尺寸控制要求。
英文摘要:
      The aim of this work was to explore the method of overlay design of fiber-reinforced material for a type of launch box. With the goal of controlling the weight of the box, the composite laminates mechanical theory combining with the method of finite element analysis were used to calculate the overlay design of fiber-reinforced material. When the fiber volume content was controlled in 43.6% and the total number of glass fiber cloth laminate layers was 10, the goal of box weight control in range of (23 ± 1) kg was achieved. The method of overlay design of fiber-reinforced material could effectively ensure the weight consistency and size control requirements.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21080876位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号