文章摘要
袁峰,张翔.高速曲面胶印机橡皮滚筒动态特性分析[J].包装工程,2016,37(7):166-170.
YUAN Feng,ZHANG Xiang.Dynamic Characteristics of Blanket Cylinder of High Speed Surface Offset Press[J].Packaging Engineering,2016,37(7):166-170.
高速曲面胶印机橡皮滚筒动态特性分析
Dynamic Characteristics of Blanket Cylinder of High Speed Surface Offset Press
投稿时间:2015-07-12  修订日期:2016-04-10
DOI:
中文关键词: 橡皮滚筒  Ansys  模态分析  谐响应分析
英文关键词: blanket cylinder  Ansys  model analysis  harmonic response analysis
基金项目:
作者单位
袁峰 郑州大学郑州 450000 
张翔 郑州大学郑州 450000 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 在考虑轴承支承刚度的情况下, 对橡皮滚筒进行模态分析和谐响应分析。方法 采用有限元分析软件Ansys对橡皮滚筒进行有限元建模。结果 分析得出其前五阶模态振型和固有频率, 以及轴承支承刚度对橡皮滚筒固有频率的影响, 通过谐响应分析得出橡皮滚筒在载荷冲击下的位移频率响应曲线。结论 分析结果表明, 该型曲面胶印机橡皮滚筒动态特性良好, 可有效保证印刷质量。
英文摘要:
      This paper conducted a modal analysis and a harmonic response analysis on the blanket cylinder in consideration of the bearing stiffness. A finite element model of blanket cylinder was built by applying the finite element analysis software Ansys. The first five-order modal shape and the inherent frequency were obtained by the analyses and the influence of bearing stiffness on the inherent frequency was further analyzed. The frequency response curve of the amplitude under load impact was worked out through the harmonic response analysis. These analytical results above showed that the dynamic characteristics of blanket cylinder were fine and the printing quality can be assured.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22549546位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号