文章摘要
张峻岭,魏风军.SPTW 对聚丙烯复合材料力学性能的影响[J].包装工程,2016,37(13):14-18.
ZHANG Jun-ling,WEI Feng-jun.Effects of Six Potassium Titanate Whiskers on Mechanical Properties of Polypropylene[J].Packaging Engineering,2016,37(13):14-18.
SPTW 对聚丙烯复合材料力学性能的影响
Effects of Six Potassium Titanate Whiskers on Mechanical Properties of Polypropylene
投稿时间:2015-12-23  修订日期:2016-07-10
DOI:
中文关键词: 六钛酸钾晶须  聚丙烯  力学性能  包装容器
英文关键词: six potassium titanate whisker  polypropylene  mechanical properties  packaging containers
基金项目:东莞市社会发展计划(2014106101036) ;2015 年广东省高职教育教学改革项目(GDJG2015005)
作者单位
张峻岭 东莞职业技术学院东莞 523808 
魏风军 河南科技大学洛阳 471023 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究六钛酸钾晶须添加量的不同对聚丙烯复合材料力学性能的影响。 方法 采用硅烷偶联剂 KH550 改性六钛酸钾晶须(SPTW),利用熔融共混法,将改性过的六钛酸钾晶须与聚丙烯(PP)、马来酸酐接枝聚丙烯(PP-g-MAH)熔融共混制得 PP/PP-g-MAH/SPTW 复合材料。 结果 比较不同含量的六钛酸钾晶须对复合材料力学性能的影响, 发现添加适量改性过的六钛酸钾晶须可明显改善复合材料的力学性能。随着六钛酸钾含量的不断增加,其弯曲强度也增大,当 SPTW 的质量分数为12%时,弯曲强度提高了 21.5%,随着含量的继续增加,弯曲强度开始下降;其拉伸强度和冲击强度都呈先增加后降低的趋势,在 SPTW 质量分数为 8.3%左右时,其拉伸强度和冲击强度分别提高了 19.7%和 31.8%。 结论 在聚丙烯中添加经硅烷偶联剂 KH550 改性的 SPTW,其质量分数为 12%时,力学性能最佳。
英文摘要:
      This work aimed to study the influence of different addition amounts of six potassium titanate whiskers (SPTW) on the mechanical properties of polypropylene composite. PP/PP-g-MAH/SPTW composite material was prepared by potassium titanate whiskers modified by silane coupling agent KH550, PP and PP-g-MAH with melt blending method. It was found that the mechanical performance of the composite was greatly enhanced when adding appropriate amount of modified SPTW through comparative test. The study showed that the bending strength, tensile strength and impact strength increased with the increasing SPTW content at first and then decreased as it continued to increase. The results indicated that the bending strength was increased by 21.5% with addition of 12% SPTW and that the tensile strength and impact strength were 19.7% and 31.8% respectively higher than before when the content of SPTW reached 8.3%. SPTW modified by silane coupling agent KH550 was added in polypropylene, the polypropylene has the best mechanical properties when SPTW's mass fraction was 12%.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21240080位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号