杨波,卢晶昌,杨光,王丹丹,李琴,袁少飞.响应面法优化豆胶强化地板平衡纸压贴工艺[J].包装工程,2016,37(13):65-70.
YANG Bo,LU Jing-chang,YANG Guang,WANG Dan-dan,LI Qin,YUAN Shao-fei.Optimization of Pressing Parameters of Equilibrium Paper Using Soy Protein-based Adhesive for Laminate Flooring with Response Surface Methodology[J].Packaging Engineering,2016,37(13):65-70. |
| 响应面法优化豆胶强化地板平衡纸压贴工艺 |
| Optimization of Pressing Parameters of Equilibrium Paper Using Soy Protein-based Adhesive for Laminate Flooring with Response Surface Methodology |
| 投稿时间：2015-11-12 修订日期：2016-07-10 |
| DOI： |
| 中文关键词: 大豆蛋白胶 平衡纸 表面胶合强度 响应面法 |
| 英文关键词:soy protein-based adhesive equilibrium paper surface bonding strength response surface method |
| 基金项目:浙江省科技计划（2016F50020） ；浙江省重大科技专项重点农业项目（2011C12050） |
| 作者 | 单位 |
| 杨波 | 上海理工大学，上海 200093 |
| 卢晶昌 | 上海理工大学，上海 200093 |
| 杨光 | 上海理工大学，上海 200093 |
| 王丹丹 | 上海理工大学，上海 200093 |
| 李琴 | 浙江省林业科学研究院，杭州 310023 |
| 袁少飞 | 浙江省林业科学研究院，杭州 310023 |
|
| Author | Institution |
| YANG Bo | University of Shanghai for Science and Technology, Shanghai 200093, China |
| LU Jing-chang | University of Shanghai for Science and Technology, Shanghai 200093, China |
| YANG Guang | University of Shanghai for Science and Technology, Shanghai 200093, China |
| WANG Dan-dan | University of Shanghai for Science and Technology, Shanghai 200093, China |
| LI Qin | Zhejiang Forestry Science Research Institute, Hangzhou 310023, China |
| YUAN Shao-fei | Zhejiang Forestry Science Research Institute, Hangzhou 310023, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 探索大豆蛋白胶用于强化地板平衡纸的压贴工艺，解决强化地板释放甲醛的问题。 方法 以大豆蛋白胶为胶黏剂，进行平衡纸与地板的热压，采用响应面法优化强化地板平衡纸的热压工艺， 结果 施胶量为 217.4 g/m2，热压温度 133.6 ℃，热压时间为 2.3 min，热压压力为 2.6 MPa，板面涂水量为 96.9 g/m2，此时的表面胶合强度达到 1.31 MPa，符合 GB/T 18102—2007 的要求。 结论 大豆蛋白胶可以用于强化地板平衡纸的压贴。 |
| 英文摘要: |
| To solve the problem of formaldehyde releasing from laminate flooring, the hot-pressing technology of equilibrium paper with soy protein-based adhesive for laminate flooring was studied. The protein-based adhesive could be used to press equilibrium paper and laminate flooring. The hot-pressing technology of equilibrium paper with soy protein-based adhesive for laminate flooring was optimized by using response surface method. It was found that soy protein-based adhesive could be used to press equilibrium paper in hot-pressing technology. The parameters used for the hot-pressing temperature, hot-pressing pressure, hot-pressing time and adhesive dosage were controlled at 133.6 ℃, 2.6 MPa, 2.3 min, 96.9 g/m2 respectively during hot pressing. Moreover, the surface bond strength reached 1.31 MPa, which met the National Standard: GB/T 18102—2007. In conclusion, soy protein-based adhesive could be used to press equilibrium paper for laminate flooring. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501716号