文章摘要
吕常智,刘培.基于神经网络 PID 的造纸机多电机同步控制研究[J].包装工程,2016,37(13):106-111.
LYU Chang-zhi,LIU Pei.Multi-motor Synchronous Control of Paper Machine Based on Neural Network PID[J].Packaging Engineering,2016,37(13):106-111.
基于神经网络 PID 的造纸机多电机同步控制研究
Multi-motor Synchronous Control of Paper Machine Based on Neural Network PID
投稿时间:2016-01-12  修订日期:2016-07-10
DOI:
中文关键词: 神经网络 PID  造纸机  多电机同步控制
英文关键词: neural network PID  paper machine  multi-motor synchronous control
基金项目:中国博士后科学基金(2012M521361);山东省青年科学家基金(BS2012DX034);山东省自然科学基金(ZR2013CQ017,ZR2012EEM021) ;山东省高校科技计划项目(J13LN17)
作者单位
吕常智 山东科技大学山东 266590 
刘培 山东科技大学山东 266590 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为提高生产的质量和降低纸的断头率,研究造纸机多电机同步控制的方法。 方法 应用Matlab/Simulink 建立模型和仿真实验,分析主从同步控制结构和并行同步控制结构,在并行同步控制结构的基础上,引入基于神经网络 PID 算法的速度补偿器。 结果 仿真结果表明,引入速度补偿后, 2 台电机的转速逐渐上升至给定速度,且速比稳定保持在 1.01。在 t=2 s 只有第 2 台电机的负载转矩发生变化时, 2 台电机的转速基本没有下降。 结论 该方法增强了造纸机多电机同步控制系统的同步跟随能力,提升了抗干扰性能,可以有效避免在造纸机运行过程中,电机负载转矩突变造成的纸张过紧断纸、过松褶皱,为造纸机多电机提供了一种新的同步控制的方法。
英文摘要:
      A multi-motor synchronous control strategy of paper machine was applied to improve the production quality and reduce the breakage rate of paper. The neural network PID algorithm based on parallel synchronization was determined by comparing with the structure of master-slave synchronization control and parallel synchronization control, for which modeling and simulating were conducted by Matlab/Simulink. The results showed that after the introduction of speed compensation, the speed of the two motors gradually increased to a given speed and maintained a stable ratio 1.01. At t=2 s, only the load torque of the second motor was changed, but the rotational speed of the two motors substantially did not decrease. This method enhances the synchronization ability of multi-motor synchronous control system and improves the anti-jamming performance. It can effectively prevent the motor load torque caused by mutations in tight paper breaking or loose folds in the process of paper machine operation, and provide a new method for synchronous control.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21082786位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号