文章摘要
叶建美.基于 PLC 的瓦线天桥自动纠偏控制系统设计[J].包装工程,2016,37(13):147-150.
YE Jian-mei.Design of Automatic Correction System for PLC-based Corrugated Web Control[J].Packaging Engineering,2016,37(13):147-150.
基于 PLC 的瓦线天桥自动纠偏控制系统设计
Design of Automatic Correction System for PLC-based Corrugated Web Control
投稿时间:2015-11-22  修订日期:2016-07-10
DOI:
中文关键词: 瓦楞单面机  光幕测量  非破坏式纠偏轮  PLC
英文关键词: web-guiding  light grid detection  anti-crush roller  PLC
基金项目:
作者单位
叶建美 浙江工业职业技术学院绍兴 312000 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究多层瓦楞纸贴合时自动纠偏系统的设计方法。 方法 基于 PLC 和触摸屏技术,采用光幕检测,控制防压纠偏轮纠偏的方法,给出了系统的硬件配置以及 PLC 的软件设计。 结果 实验验证了基于光幕可以准确、实时驱动纠偏轮进行自动控制。 结论 自动纠偏控制系统具有良好的检测精度和快速的响应能力,能显著提高瓦楞纸板质量,在瓦楞包装行业有良好的使用前景。
英文摘要:
      In order to study the design method of the automatic correction system for the multilayer corrugated board production line, hardware configuration for the automatic correction system and PLC software design were put forward based on PLC, touch screen technology, light grid detection and the anti-crush roller technology. The experiment verified that the control system could automatically guide the corrugated web accurately in real time. The automatic correction system has good accuracy and quick response ability. Thus it can improve the product quality of corrugated board and will have bright prospect in corrugated industry.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20797979位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号