文章摘要
王雪丹,钱静.组合称量思想在单包装件组合计量上的应用[J].包装工程,2017,38(1):42-46.
WANG Xue-dan,QIAN Jing.Application of Combination Weighing Methods in Single Package[J].Packaging Engineering,2017,38(1):42-46.
组合称量思想在单包装件组合计量上的应用
Application of Combination Weighing Methods in Single Package
投稿时间:2016-08-05  修订日期:2017-01-10
DOI:
中文关键词: 组合称量  计量精度  概率分析
英文关键词: combination weighing  measurement accuracy  probability analysis
基金项目:
作者单位
王雪丹 江南大学无锡 214122 
钱静 江南大学无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究多包装件的机械化组合计量,且保证总质量符合计量精度的要求。方法 基于包装计量的理论知识,将组合称量的思想应用到包装件组合计量的方式中,提出称量设备的结构设想,并设计主程序控制系统的流程,用数学上的方差、概率等知识为组合的精度及组合秤斗的数量进行理论分析,最后用实例研究来对比人工组合称量与计算机组合称量的精度。结果 设计出的组合称量的装置在结构上可满足单个饼干包装件防碎的目的,理论上可满足某饼干公司计量精度的要求,其速度和精度都高于人工组合称量。结论 通过研究可设计出代替人工组合的机械装置,且组合的总质量满足计量精度要求。
英文摘要:
      The work aims to study the mechanized combination measurement of multiple packages and ensure that the total mass conforms to the requirements of measurement accuracy. Based on the theoretical knowledge of the packaging measurement, the combination weighing methods were applied to the combination weighing of the packages, and the structural assumption for weighing equipment was proposed. In addition, the process of the main program’s control system was designed. According to the mathematical knowledge integrated with variance and probability, etc., the accuracy of a combination and the number of weighing hoppers were theoretically analyzed. Finally, the case study was used to compare the accuracy of weighing between artificial combination and computer combination. The device designed for combination weighing could structurally serve the purpose of protecting single biscuit package, and could theoretically meet the requirements of measurement accuracy of some biscuit companies. Its speed and accuracy were higher than those of the artificial combination weighing. Through the research, a mechanical device can be designed to substitute the artificial combination, and the total mass of the combination can meet the requirements of measurement accuracy.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21158479位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号