文章摘要
王灿才,王所杰.纸堆翻转机液压系统设计[J].包装工程,2017,38(9):204-208.
WANG Can-cai,WANG Suo-jie.Design of Hydraulic System for Paper Pile Turner[J].Packaging Engineering,2017,38(9):204-208.
纸堆翻转机液压系统设计
Design of Hydraulic System for Paper Pile Turner
投稿时间:2016-10-13  修订日期:2017-05-10
DOI:
中文关键词: 翻转机  液压系统  数学模型  关键参数
英文关键词: turner  hydraulic system  mathematical model  key parameters
基金项目:
作者单位
王灿才 青岛科技大学青岛 266042 
王所杰 青岛科技大学青岛 266042 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了能够精确、高效地设计纸堆翻转液压系统,建立液压系统关键参数求解模型。方法 通过理论分析与实践研究相结合的方法建立数学模型,即以纸张和纸堆的基本参数作为输入参数,以液压系统的油缸直径作为输出参数,建立翻转机液压系统设计关键参数的数学模型,并在此模型的基础上完善液压系统的其他参数,进而确定液压系统的整体结构,最后完成样机的制作。结果 实践结果表明,1.8 t的纸堆采用15 MPa的油压,直径为55 mm的油缸可以将纸堆夹紧,采用直径为80 mm的油缸可以将纸堆推起。结论 通过样机的制造验证,表明所建立的液压系统的数学模型可以准确地求解液压系统的关键参数。
英文摘要:
      The work aims to accurately and efficiently design the pile turner’s hydraulic system and establish the model for solution to key parameters of hydraulic system. The mathematical model was established in combination with theoretical analysis and practice research, namely, with the basic parameters of paper and paper pile as input parameters, and the oil cylinder diameter of hydraulic system as output parameter, the mathematical model for the key design parameters of turner’s hydraulic system was built. Based on such mathematical mode, other parameters of hydraulic system were improved, thus determining the overall structure of hydraulic system. Finally, the fabrication of prototype was completed. The practice results showed that, 1.8 t paper piles could be clamped by the oil cylinder with oil pressure of 15 MPa and diameter of 55 mm, and pushed up by oil cylinder with diameter of 80 mm. By verifying the fabrication of prototype, it indicates that the mathematical model established can accurately solve the key parameters of hydraulic system.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20810775位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号