文章摘要
胡亚南,祁广利,霍蛟飞,王鹏文.基于模糊PID的FDM型3D打印机喷头温度控制系统[J].包装工程,2017,38(19):173-178.
HU Ya-nan,QI Guang-li,HUO Jiao-fei,WANG Peng-wen.Temperature Control System of FDM Type 3D Printer Nozzle Based on Fuzzy PID[J].Packaging Engineering,2017,38(19):173-178.
基于模糊PID的FDM型3D打印机喷头温度控制系统
Temperature Control System of FDM Type 3D Printer Nozzle Based on Fuzzy PID
投稿时间:2017-04-17  修订日期:2017-10-10
DOI:
中文关键词: FDM  3D打印机  喷头  温度控制  模糊控制  PID
英文关键词: FDM  3D printer  nozzle  temperature control  fuzzy control  PID
基金项目:国家自然科学基金(41171275);西京学院科研基金(XJ160231)
作者单位
胡亚南 西京学院西安 710021 
祁广利 陕西科技大学西安 710021 
霍蛟飞 西京学院西安 710021 
王鹏文 西京学院西安 710021 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 提高FDM型3D打印机打印产品的精度及表面质量。方法 针对FDM型3D打印机喷头温度控制具有的非线性特点,利用模糊规则对PID增量参数实时在线校正,设计基于模糊PID算法的喷头温度控制系统,并将其与传统PID控制器仿真对比。结果 模糊PID控制器较传统PID控制器超调量小、达到稳定时间短、鲁棒性强,能够有效地提高温度控制系统的稳定性和控制精度。结论 模糊PID控制能够提高FDM型3D打印机喷头温度控制精度,从而提高了打印产品的精度和表面质量。
英文摘要:
      The work aims to improve the precision and surface quality of FDM type 3D printer’s printing products. For the temperature control of FDM type 3D printer nozzle featured by the nonlinearity, the PID increment parameter was corrected online for real time with the fuzzy rules. The nozzle temperature control system based on the fuzzy PID algorithm was designed and compared with the simulation of traditional PID controller. Compared with the traditional PID controller, the fuzzy PID controller characterized by small overshoot, short settling time and strong robustness could effectively improve the stability and control precision of temperature control system. The fuzzy PID control can improve the temperature control precision of the FDM type 3D printer nozzle, so as to improve the precision and surface quality of the printing products.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22543882位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号