文章摘要
李明辉,张孝杰.注塑机料筒多段温度控制系统的研究与设计[J].包装工程,2017,38(19):179-184.
LI Ming-hui,ZHANG Xiao-jie.Research and Design of the Multi-stage Temperature Control System of the Injection Molding Machine Barrel[J].Packaging Engineering,2017,38(19):179-184.
注塑机料筒多段温度控制系统的研究与设计
Research and Design of the Multi-stage Temperature Control System of the Injection Molding Machine Barrel
投稿时间:2017-03-27  修订日期:2017-10-10
DOI:
中文关键词: 料筒温度  静态解耦  自适应控制
英文关键词: barrel temperature  static decoupling  adaptive control
基金项目:
作者单位
李明辉 西京学院西安 710021 
张孝杰 濮阳市自来水公司濮阳 457000 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 提高注塑机料筒温度控制的精度和稳定性,解决注塑机多段温度控制系统存在的非线性、强耦合、时变性等问题。方法 通过分析注塑机的结构及工作原理,利用基于神经网络的静态解耦策略,将相互耦合的回路解耦成单回路系统,并采用粒子群算法优化模糊PID的量化因子。结果 仿真及测试表明,各料筒温度响应较迅速,料筒温度超调小,稳态控制误差小,能够获得良好的控制效果。结论 通过仿真显示,该控制策略能够克服料筒各段之间的耦合影响,适应性强,稳定性好,有一定的抗干扰能力,使注塑机的温度控制效果得到明显改善,具有一定的实用价值。
英文摘要:
      The work aims to improve the accuracy and stability of the temperature control of the injection molding machine barrel, and solve such problems as nonlinearity, strong coupling and time variation in the multi-stage temperature control system of the injection molding machine. By analyzing the structure and working principle of the injection molding machine, the intercoupled circuits were decoupled as a single-circuit system with the static decoupling strategy based on the neural network; and the quantization factor of fuzzy PID was optimized by particle swarm optimization. The simulation and test showed that, the temperature response of each barrel was relatively fast, the barrel temperature overshoot was small, and the homeostatic control error was small, so that good control effects could be achieved. The simulation shows that, the proposed control strategy can overcome the coupling effects occurring between sections of the barrel. With strong adaptation, good stability and certain capacity of resisting disturbance, the temperature control effects of the injection modeling machine can be significantly improved, which has certain practical value.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22551165位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号