文章摘要
侯立功,吴伟,肖颖.基于ARM的包装袋成型机嵌入式控制系统设计[J].包装工程,2018,39(1):121-125.
HOU Li-gong,WU Wei,XIAO Ying.Embedded Control System for Bag-making Machines Based on ARM[J].Packaging Engineering,2018,39(1):121-125.
基于ARM的包装袋成型机嵌入式控制系统设计
Embedded Control System for Bag-making Machines Based on ARM
投稿时间:2017-03-29  修订日期:2018-01-10
DOI:
中文关键词: 包装袋  成型机  ARM  嵌入式控制  协调控制
英文关键词: bag  making machine  ARM  embedded control  coordinated control
基金项目:国家自然科学基金(61502204);江苏省优秀科技创新团队基金(苏教科[2017]6号);无锡职业技术学院智能制造工程中心专项课题(ZN201602)
作者单位
侯立功 无锡职业技术学院无锡 214121 
吴伟 无锡职业技术学院无锡 214121 
肖颖 无锡职业技术学院无锡 214121 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为提高包装袋成型机的控制精度、实时性、系统集成度,基于ARM微控制器设计一种嵌入式控制系统。方法 详细论述包装袋成型机的工作原理,通过送料、牵引、热封、分切等工序,将包装薄膜制成包装袋。给出硬件设计方法,包括控制器、传感器模块、电动执行模块等。同时讨论伺服电机升降速控制算法和张力浮动辊控制算法,基于uC/OS-II给出软件设计方法。结果 该控制系统具有集成度高、实时性好、开发成本不高等优点。结论 该控制系统能够满足包装袋成型机的工艺要求和控制需求。
英文摘要:
      The work aims to design an embedded control system based on ARM microcontroller for the purpose of improving the control precision, real-time and system integration of bag-making machine. The working principle of bag-making machine was described in detail. The packaging bag was made from film through feeding, traction, heat sealing and cutting process. The hardware design method was given, including controller, sensor module and electric execution module. Meanwhile, the servo motor speed control and tension floating roll control algorithms were discussed. The software design method was given based on uC/OS-II. The control system described had advantages such as high integration level, good real time, low development cost and so on. The control system can meet the technological requirements and control requirements of bag-making machines.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21146965位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号