文章摘要
余艳伟,徐鹏飞.一种基于内模控制的分数阶控制器设计[J].包装工程,2018,39(5):48-51.
YU Yan-wei,XU Peng-fei.A Design of Fractional Order Controller Based on Internal Model Control[J].Packaging Engineering,2018,39(5):48-51.
一种基于内模控制的分数阶控制器设计
A Design of Fractional Order Controller Based on Internal Model Control
投稿时间:2017-08-15  修订日期:2018-03-10
DOI:10.19554/j.cnki.1001-3563.2018.05.010
中文关键词: 分数阶控制器  内模控制  参数整定
英文关键词: fractional order controller  internal model control  parameter setting
基金项目:河南省科技厅科技发展计划(152102210098,172102210125);河南省教育厅科技攻关计划(15A470010,16A410002)
作者单位
余艳伟 河南机电职业学院郑州 450000 
徐鹏飞 河南机电职业学院郑州 450000 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了解决分数阶控制器参数整定复杂问题,引入内模控制思想,从而得到分数阶内模控制器控制的被控对象。方法 依据最大灵敏度整定所得分数阶内模控制器中的参数,避免参数整定的盲目性。结果 相对于传统的分数阶控制器,基于内模控制思想设计得到的分数阶内模控制其设定值跟踪及抗干扰性能更优。结论 仿真结果表明基于文中方法设计所得的分数阶内模控制器在模型失配时,仍具有较好的鲁棒性和控制精度。
英文摘要:
      The work aims to introduce the internal model control thought, thus obtaining the objects controlled by the fractional order internal model controller, to solve the problem of fractional order controller parameter setting complexity. According to the parameters in the fractional order internal model controller obtained by the setting of the maximum sensitivity, the blindness of parameter setting was avoided. Compared with the traditional fractional order controller, the set value tracking and anti-interference ability of fractional order internal model control designed based on the internal model control thought were better. The simulation results show that, for the model mismatch of the fractional order internal model controller designed based on the proposed method, it still has better robustness and control accuracy.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22647685位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号