文章摘要
李良春,张晶,刘仲权,关继成,孙宁国.基于启发式算法的弹药托架集装优化研究[J].包装工程,2018,39(5):209-212.
LI Liang-chun,ZHANG Jing,LIU Zhong-quan,GUAN Ji-cheng,SUN Ning-guo.Optimization of Ammunition Bracket Loading Based on Heuristic Algorithm[J].Packaging Engineering,2018,39(5):209-212.
基于启发式算法的弹药托架集装优化研究
Optimization of Ammunition Bracket Loading Based on Heuristic Algorithm
投稿时间:2017-09-04  修订日期:2018-03-10
DOI:10.19554/j.cnki.1001-3563.2018.05.039
中文关键词: 弹药保障  装载  优化  启发式
英文关键词: ammunition support  loading  optimization  heuristic
基金项目:
作者单位
李良春 军械技术研究所石家庄 050003 
张晶 陆军重庆军事代表局重庆 400060 
刘仲权 军械技术研究所石家庄 050003 
关继成 72790部队济南 250308 
孙宁国 72790部队济南 250308 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为减少部队弹药保障单位的储备数量和勤务时间,加快弹药保障反应速度,以托架为基础,对集装弹药进行装载优化,实现快速高效的弹药单元化保障目标,增强部队弹药机动保障、直达保障能力。方法 建立弹药托架装载优化模型,提出基于启发式算法的求解思路,并给出算法步骤。结果 通过算例验证了优化模型的有效性,以12种待装弹药为例,利用算法使托架的平均空间利用率达到60.25%,平均面积利用率达到89.94%。结论 为解决弹药装载优化问题提供了一种技术方法,并发现标准托架与箱装弹药在设计时没有考虑互相匹配的问题,在将来托架和箱装弹药的设计中应加以考虑。
英文摘要:
      The work aims to optimize the loading of ammunition in containers based on the bracket to achieve the goal of rapid and efficient ammunition unit support and enhance the ammunition mobile support and direct support capability, for the purpose of reducing the reserve number of troops ammunition support units and service time and speeding up the ammunition support reaction speed. The optimization mode of ammunition bracket loading was established. The solving idea and algorithm steps were put forward based on the heuristic algorithm. As a result, through the example, the effectiveness of the optimization model was proved. Taking the 12 kinds of ammunition to be loaded as an example, the average space utilization rate of the bracket was 60.25% and the average area utilization rate was 89.94% with the algorithm. It provides a technical method to solve the problem of ammunition loading optimization and finds that the standard brackets and boxed ammunition are not considered to match each other during the design. This factor should be considered for such design in the future.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20797840位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号